2702501 PHOENIX CONTACT - Technology Bsa

IB IL RTD 4/PT1000-ECO - Temperature module

Inline, Temperature measurement terminal, Analog RTD inputs: 4 (Pt1000), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector

Product Code: 2702501

Partner cod.: 2702501

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/ce7f4782bdcb464e9a377cdf91e8c207/-S204x204-FJPG Width: 12.2 mm Height: 119.8 mm Depth: 71.5 mm
Interfaces	Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps
System properties	Module ID code (dec.): 126 ID code (hex): 7E Length code (hex): 04 Length code (dec): 04 Process data channel: 64 bit Input address area: 8 Byte Output address area: 0 Byte Register length: 64 bit Required parameter data: 1 Byte Required configuration data: 4 Byte
Input data	Analog Input name: Analog RTD inputs Description of the input: Input for resistive temperature sensors Number of inputs: 4 (Pt1000) Connection method: Inline connector Connection technology: 2-conductor Note regarding the connection technology: shielded A/D conversion time: typ. 120 ms A/D converter resolution: 24 bit Sensor types (RTD) that can be used: Pt 1000 (IEC 60751/EN 60751) Data formats: Standardized representation Input filter: Digital filter Input filter time: 120 ms (per channel) Nominal value of the current sources: 210 µA (pulsed current, the data is valid during the sampling phase) Process data update: < 10 ms Protective circuit: Overload protection; max. ±40VDC, 1 min. Transient protection; Suppressor diode
Product properties	Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connector Diagnostics messages: Failure of the internal I/O supply I/O error message sent to the bus coupler Checksum error I/O error message sent to the bus coupler
Electrical properties	Potentials Power consumption: typ. 0.67 W max. 0.97 W Potentials: Communications power (U Supply voltage: 7.5 VDC (via voltage jumper) Current draw: max. 85 mA typ. 56 mA Potentials: Supply of analog modules (U Supply voltage: 24 VDC (via voltage jumper) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 14 mA typ. 7.3 mA Electrical isolation/isolation of the voltage ranges Test voltage: Bus logic (local bus, communications power): 500 VAC, 50 Hz, 1 min. Test voltage: Analog I/O: 500 VAC, 50 Hz, 1 min. Test voltage: Functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): 0°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (according to DINEN61131-2) Permissible humidity (storage/transport): 10 % ... 95 % (according to DINEN61131-2)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting