2703021 PHOENIX CONTACT - Technology Bsa

PP-RJ-SC-F - Patch panels

Patch panel, RJ45 jack on screw terminal blocks, 10/100/1000Mbps, DIN rail adapter, IP20, shield contacting with strain relief, shield current monitoring, surge protection

Product Code: 2703021

Partner cod.: 2703021

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionÃ¢ CCCex note: Use in potentially explosive areas is not permitted in China.
Product properties	IEC test classification: C2 Product type: Patch panel MTTF: 3268 Years (SN29500 standard, temperature25°C, operating cycle21%) 1238 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 468 Years (SN29500 standard, temperature40°C, operating cycle100%) Insulation characteristics Overvoltage category: II Pollution degree: 2
Electrical properties	Electrical isolation: FE // Ethernet Maximum power dissipation for nominal condition: 0 W Rated insulation voltage: 85 VDC Supply Supply voltage range: 36 VDC ... 52 VDC ±10% (via PoE) 42 VDC ... 57 VDC (in acc. with UL) Function Designation: Shield current monitoring Switch-on threshold: Ã¢¥ 30 mA Local diagnostics: Yellow LED Precision: ± 5 % Response time: 3 s Current: Ã¢¤ 1.5 A Power consumption: 270 mW (Shield current monitoring) Impedance: Ã¢¤ 1 Ã© Voltage: Ã¢¤ 10 V
Interfaces	Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE802.3 Serial transmission speed: 10/100/1000 Mbps Frequency range: 125 MHz Connection method: Screw connection Tightening torque: 0.22 Nm ... 0.25 Nm Pin assignment: 1:1 Transmission length: 100 m (including patch cables) Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm² Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm² Max. AWG conductor cross section, flexible: 16 Min. AWG conductor cross section, flexible: 28 Single-wire/terminal point, rigid AWG max.: 16 Single-wire/terminal point, rigid AWG min.: 28 Stripping length: 5 mm Transmission medium: Copper Maximum output power: 60 W Maximum output current: 725 mA (PoE) Current carrying capacity: Ã¢¤ 1.5 A (Ã¢¤ 60 W (PoE+)) Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE802.3Ã¢ Connection method: RJ45 jack
Signaling	Optical representation: Yellow LED
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c2c04032133b9b48883596b0703f60a6/-S204x204-FJPG Width: 23.8 mm Height: 101.3 mm Depth: 86 mm
Material specifications	Material: Plastic Flammability rating according to UL 94: V0
Cable/line	External cable diameter (): 5.5 mm ... 6.5 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 (Manufacturer's declaration) Ambient temperature (operation): -40°C ... 75°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Ã¢¤ 2000 m (Restrictions for ATEX applications) Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant ATEX Identification: Ã¯ II 3 G Ex nA nC IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 Class I, Div. 2, Groups A, B, C, D UL, USA Certificate: UL60079-0 Ed.6 / UL60079-15 Ed.4 UL, Canada Certificate: CSA22.2 No.60079-0 Ed.3 / CSA22.2 No.60079-15:16 Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A Shipbuilding Identification: DNV GL DNV GL data Temperature: D Humidity: B Vibration: B EMC: B
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU FCC Part15B ClassA CISPR22 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Indirect discharge: ± 6 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2.2 kV (1minute) Signal: ± 2.2 kV (1minute) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV Signal: ± 1 kV (Data line, asymmetrical) Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN61000-6-4 Comments: Class A, industrial applications Emitted interferenceÃ¢ Standards/regulations: EN61000-6-3 Comments: Class B, domain of use: residential and small commercial Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Standards and regulations	Standards/regulations: DINEN61643-21
Mounting	Mounting type: DIN rail mounting, stationary