Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2708083
PHOENIX CONTACTNot available

PSI-MOS-DNET CAN/FO 850/BM - FO converters

FO converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 800 kbps, basic module, interfaces: 1 x CAN, 1 x alarm, 1 x FO (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
Product Code: 2708083
Partner cod.: 2708083
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction​
CCCex note: Use in potentially explosive areas is not permitted in China.
Product propertiesProduct type: Media converter
Application: Base module
MTBF: 299 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
47 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Electrical propertiesElectrical isolation: VCC // CAN
Maximum power dissipation for nominal condition: 2 W
Test voltage data interface/power supply: 1.5 kVrms (50Hz, 1min.)
Supply
Supply voltage range: 10 VDC ... 30 VDC (via pluggable COMBICON screw terminal block)
Nominal supply voltage: 24 VDC (in acc. with UL)
Typical current consumption: 100 mA (24VDC)
Max. current consumption: 100 mA
Output dataSwitching
Output name: Relay output
Output description: Alarm output
Number of outputs: 1
Maximum switching voltage: 60 VDC
42 VAC
Limiting continuous current: 0.46 A
Connection dataSupply
Connection method: Pluggable COMBICON screw terminal block through basic module
Tightening torque: 0.56 Nm ... 0.79 Nm
InterfacesBit distortion, input: ± 35 % (permitted)
Bit distortion, output: < 6.25 %
Signal: CAN
CANopen®
DeviceNet™
Data: optical FO
No. of channels: 1
Transmit capacity, minimum: -17.9 dBm (50/125µm)
-14.1 dBm (62,5/125 µm)
-5.1 dBm (200/230µm)
Transmission length incl. 3 dB system reserve: 2800 m (F-K 200/230 8dB/km with quick mounting connector)
4800 m (with F-G 50/125 2.5 dB/km)
4200 m (with F-G 62,5/125 3.0 dB/km)
Connection method: B-FOC (ST®)
Wavelength: 850 nm
Minimum receiver sensitivity: -32.5 dBm (50/125µm)
-32.5 dBm (62,5/125 µm)
-32.1 dBm (200/230µm)
Transmission medium: PCF fiber
Multi-mode fiberglass
Data: CAN interface, in accordance with ISO/IS11898 for DeviceNet™, CAN, CANopen
Serial transmission speed: ≤ 800 kbps
Connection method: Pluggable screw connection
Transmission length: ≤ 5000 m (Dependent on the data rate and the protocol used)
Termination resistor: 120 Ω (Can be connected)
Transmission medium: Copper
File format/coding: Bit stuffing, NRZ
DimensionsWidth: 22.5 mm
Height: 99 mm
Depth: 114.5 mm
Material specificationsMaterial: PA 6.6-FR
Cable/lineFO cable
Fiber types: 200/230µm
50/125 µm
62.5/125 µm
PCF fiber
Fiberglass
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -20°C ... 60°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation): 30 % ... 95 % (non-condensing)
ApprovalsCE
Certificate: CE-compliant
EAC
Identification: EAC
ATEX
Identification: ï˜ II 3 G Ex nA nC IIC T4 Gc X
Note: Please follow the special installation instructions in the documentation!
ATEX, FO interface
Identification: ï˜ II (2) G [Ex op is Gb] IIC
ï˜ II (2) D [Ex op is Db] IIIC
Certificate: PTB06ATEX2042U
Note: Please follow the special installation instructions in the documentation!
UL, USA/Canada
Identification: Class I, Zone 2, AEx nc IIC T5
Class I, Div. 2, Groups A, B, C, D
Corrosive gas test
Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC dataNoise immunity: EN 61000-6-2
Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Noise emission: EN 55011
Electrostatic discharge
Standards/regulations: EN61000-4-2
Electrostatic discharge​
Contact discharge: ± 6 kV
Discharge in air: ± 8 kV
Comments: Criterion B
Electromagnetic HF field
Standards/regulations: EN61000-4-3
Electromagnetic HF field​
Field intensity: 10 V/m
Comments: Criterion A
Fast transients (burst)
Standards/regulations: EN61000-4-4
Fast transients (burst)​
Input: 2 kV (5kHz)
Signal: 2 kV (5kHz)
Comments: Criterion B
Surge current load (surge)
Input: 0.5 kV (42Ω)
Signal: 1 kV (2 Ω)
Comments: Criterion B
Conducted interference
Standards/regulations: EN61000-4-6
Conducted interference​
Comments: Criterion A
Voltage: 10 V
Emitted interference
Standards/regulations: EN55011
Comments: Class A, industrial applications
Criteria
Criterion A: Normal operating behavior within the specified limits.
Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
MountingMounting type: DIN rail mounting
Technical Specs
ECLASSECLASS-11.0: 19170411
ECLASS-12.0: 19170411
ECLASS-13.0: 19170411
ETIMETIM 9.0: EC001467
UNSPSCUNSPSC 21.0: 43201500
Description
FO converter with integrated optical diagnostics, for DeviceNet™, CAN, CANopen® up to 800 kbps, basic module, interfaces: 1 x CAN, 1 x alarm, 1 x FO (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00156.pdf

Approvals_00056.pdf

Approvals_00127.pdf

Approvals_01560.pdf

Approvals_01561.pdf

Approvals_01763.pdf

Data_sheet_03401.pdf

Data_sheet_03077.pdf

Manufacturer_declaration_04642.pdf

Manufacturer_declaration_05546.pdf

Manufacturer_declaration_14805.pdf

Manufacturer_declaration_17707.pdf

Package_slip_01826.pdf

Technical_drawing_38015.pdf