2708397 PHOENIX CONTACT - Technology Bsa

PSI-MOS-RS422/FO 850 T - FO converters

FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)

Product Code: 2708397

Partner cod.: 2708397

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionÃ¢ CCCex note: Use in potentially explosive areas is not permitted in China.
Product properties	Product type: Media converter MTTF: 746 Years (SN29500 standard, temperature25°C, operating cycle21%) 309 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 128 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 178 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 26 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Electrical properties	Electrical isolation: VCC // RS-422 Maximum power dissipation for nominal condition: 2.88 W Test voltage data interface/power supply: 1.5 kV_rms (50Hz, 1min.) Supply Supply voltage range: 18 VDC ... 30 VDC Nominal supply voltage: 24 VDC (in acc. with UL) Typical current consumption: 120 mA (24VDC) Max. current consumption: 130 mA Ã¢¤ 2 A (For operation in a joining station, via the DIN rail connector)
Output data	Switching Output name: Relay output Output description: Alarm output Number of outputs: 1 Maximum switching voltage: 60 VDC 42 VAC Limiting continuous current: 0.46 A
Connection data	Supply Connection method: COMBICON plug-in screw terminal block Tightening torque: 0.56 Nm ... 0.79 Nm
Interfaces	Bit distortion, input: ± 35 % (permitted) Bit distortion, output: < 6.25 % Signal: INTERBUS Transmission channels: 2 (1/1) RD, TD, full duplex Data: optical FO No. of channels: 2 Transmit capacity, minimum: -4.6 dBm (200/230µm) -17.6 dBm (50/125µm) -13.6 dBm (62,5/125 µm) Transmission length incl. 3 dB system reserve: 2800 m (F-K 200/230 10dB/km with quick mounting connector) 4200 m (with F-G 50/125 2.5 dB/km) 4800 m (with F-G 62,5/125 3.0 dB/km) Transmission protocol: Transparent to protocol for RS-422 interface Connection method: B-FOC (ST^®) Wavelength: 850 nm Minimum receiver sensitivity: -33.2 dBm Transmission medium: PCF fiber Multi-mode fiberglass Data: RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1 Serial transmission speed: Ã¢¤ 2 Mbps Connection method: Pluggable screw connection Transmission length: Ã¢¤ 1000 m (depending on the data rate, with shielded, twisted data cable) Termination resistor: 220 Ã© 100 Ã© 220 Ã© Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Max. AWG conductor cross section, flexible: 14 Min. AWG conductor cross section, flexible: 24 Single-wire/terminal point, rigid AWG max.: 14 Single-wire/terminal point, rigid AWG min.: 24 Transmission medium: Copper File format/coding: UART (11 Bit, NRZ)
Dimensions	Width: 35 mm Height: 99 mm Depth: 103 mm
Material specifications	Material: PA 6.6-FR
Cable/line	FO cable Fiber types: 200/230µm 50/125 µm 62.5/125 µm PCF fiber Fiberglass
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 30 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant ATEX Identification: Ã¯ II 3 G Ex nA nC IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! ATEX, FO interface Identification: Ã¯ II (2) G [Ex op is Gb] IIC Ã¯ II (2) D [Ex op is Db] IIIC Certificate: PTB06ATEX2042U Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: Class I, Zone 2, AEx nc IIC T5 Class I, Zone 2, Ex nC nL IIC T5 X Class I, Div. 2, Groups A, B, C, D Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC data	Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55011 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2 kV Signal: ± 2 kV Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV Signal: ± 1 kV Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN55011 Comments: Class A, industrial applications Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Mounting	Mounting type: DIN rail mounting