Not available 
| Product properties | IEC test classification: I / II T1 / T2 EN type: T1 / T2 IEC power supply system: TN-C TN-S TT Type: DIN rail module, two-section, divisible Product type: Replacement plug Product family: VALVETRAB MS Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
| Connection data | Connection method: pluggable |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/244085b8304de74e95f3135ca62ba23a/-S204x204-FJPG Width: 17.7 mm Height: 47 mm Depth: 67.3 mm Horizontal pitch: 1 Div. |
| Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PA 6.6 PBT |
| Protective circuit | Mode of protection: L-N L-PEN Direction of action: L-N / L-PEN Nominal voltage UN: 240/415VAC (TN-C, TN-S) 240/415VAC (TT) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 335 VAC Residual current IPE: ⤠800 µA Standby power consumption PC: ⤠270 mVA Nominal discharge current In (8/20) µs: 12.5 kA Maximum discharge current Imax (8/20) µs: 50 kA Impulse discharge current (10/350)µs, charge: 6.25 As Impulse discharge current (10/350)µs, specific energy: 39 kJ/é Impulse discharge current (10/350)µs, peak value limp: 12.5 kA Short-circuit current rating ISCCR: 25 kA Voltage protection level Up: ⤠1.2 kV ⤠1.6 kV (30 kA - 8/20 µs) Residual voltage Ures: ⤠1.2 kV (at In) ⤠1.1 kV (at 10 kA) ⤠1 kV (at 5 kA) ⤠0.9 kV (at 3kA) TOV behavior at UT: 415 VAC (5s / withstand mode) 457 VAC (120min / safe failure mode) Response time tA: ⤠25 ns Max. backup fuse with branch wiring: 160 A (gG) Additional technical data Maximum discharge current Imax (8/20) µs: 65 kA |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Approvals | UL specifications Maximum continuous operating voltage MCOV (L-N): 335 VAC Nominal discharge current In (L-N): 20 kA Mode of protection: L-N Nominal voltage: 240VAC Power distribution system: Single phase Nominal frequency: 50/60 Hz Measured limiting voltage MLV (L-N): 2630 V SPD Type: 4CA |
| Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
| Mounting | Mounting type: on base element |
| ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
| ETIM | ETIM 9.0: EC002496 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
