2810308 PHOENIX CONTACT - Technology Bsa

MINI MCR-SL-PT100-LP-NC - Temperature measuring transducer

Configurable loop-powered temperature transducer for Pt100 temperature sensors, configured via DIP switches, with screw connection, not preconfigured

Product Code: 2810308

Partner cod.: 2810308

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Product type: Temperature transmitter Product family: MINI Analog Configuration: DIP switches Insulation characteristics Overvoltage category: II Pollution degree: 2
Electrical properties	Linearity error: < 0.05 % (for full measuring range) Maximum power dissipation for nominal condition: < 42 mW Step response (0Ã¢99%): < 200 ms Maximum temperature coefficient: < 0.02 %/K Transmission error in the set measuring range: ((90 K / set measuring range [K]) + 0.05)% Transmission error in the full measuring range: Ã¢¤0.25% Electrical isolation Input/output/power supply Rated insulation voltage: 30 VAC 50 VDC Test voltage: 1.5 kV AC (50Hz, 60s) Insulation: Basic insulation in accordance with IEC/EN61010 Supply Designation: Loop-powered Supply voltage range: 12 VDC ... 30 VDC Max. current consumption: < 4.5 mA (without signal current) Power consumption: < 150 mW (without signal current)
Input data	Signal Number of inputs: 1 Measurement Configurable/programmable: Yes, unconfigured Sensor types (RTD) that can be used: Pt 100 (IEC 60751/EN 60751) Temperature measuring range: min. 50 K Sensor type:: -150°C ... 300°C (configurable) Sensor input current: 1 mA (constant) Max. permissible overall conductor resistance: 10 Ã© (Per cable) Connection technology: 2-, 3-, 4-conductor Error detection limit (short-circuit): < 30 Ã© Error detection limit (underrange): 30 Ã© Ã¢¤ (start span - 2.5% span) Error detection limit (overrange): (end span + 2.5% span) Ã¢¤ approx. 254 Ã© Error detection limit (wire break): > approx. 254 Ã©
Output data	Signal: Current Number of outputs: 1 Configurable/programmable: Yes, unconfigured Current output signal: 4 mA ... 20 mA 20 mA ... 4 mA Max. current output signal: 23 mA (output limit) Load/output load current output: (U_supply- 12V) / 22mA Ripple: < 20 mV_PP (at 500 Ã©)
Connection data	Connection method: Screw connection Stripping length: 12 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 12
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8450693c9d67004aa7841c306225c8da/-S204x204-FJPG Width: 6.2 mm Height: 93.1 mm Depth: 101.2 mm
Material specifications	Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 65°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL508 Recognized Class I, Div. 2, Groups A, B, C, D T4
EMC data	Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Comments: Safety measures must be taken to prevent electrostatic discharge. Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Typical deviation from the measuring range final value: 5 % Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Typical deviation from the measuring range final value: 5 % Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Comments: Criterion B Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Typical deviation from the measuring range final value: 5 %
Mounting	Mounting type: DIN rail mounting Mounting position: any