2819765 PHOENIX CONTACT - Technology Bsa

IB IL INC-IN-2MBD-PAC - Special function module

Inline, Position detection module, Incremental encoder input:1, Symmetrical and asymmetrical encoders, Digital inputs:3, 24 VDC, Digital outputs:1, 0.5 A, transmission speed in the local bus:2 Mbps, degree of protection:IP20, including Inline connectors and marking fields

Product Code: 2819765

Partner cod.: 2819765

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/63a4d567f575814996d04defd50b4eeb/-S204x204-FJPG Width: 24.4 mm Height: 140.5 mm Depth: 71.5 mm
Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Interfaces	Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 2 Mbps Transmission physics: Copper
System properties	Module ID code (dec.): 127 ID code (hex): 7F Length code (hex): 02 Length code (dec): 02 Process data channel: 32 bit Input address area: 4 Byte Output address area: 4 Byte Register length: 4 Byte Required parameter data: 1 Byte Required configuration data: 5 Byte
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 type 1 Number of inputs: 3 Connection method: Spring-cage connection Connection technology: 3-conductor Input voltage range "0" signal: -3 VÃDC ... 5 VÃDC Input voltage range "1" signal: 15 VÃDC ... 30 VÃDC Nominal input voltage U_IN: 24 VÃDC Nominal input current at U_IN: typ. 2.7 mA Encoder Number of inputs: 1 (Symmetrical or asymmetrical) Input name: Incremental encoder input Encoder signals: Symmetrical and asymmetrical encoders Cable length: max. 30 m (shielded cable, to ensure conformance with EMC Directive)
Output data	Digital Output name: Digital outputs Connection method: Spring-cage connection Connection technology: 2-conductor Number of outputs: 1 (NPN, double assignment of input E3)
Product properties	Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connectors and marking fields Operating mode: Process data mode with two words Insulation characteristics Overvoltage category: II (IEC 60664-1, ENÃ60664-1) Pollution degree: 2 (IEC 60664-1, ENÃ60664-1)
Electrical properties	Encoder Number: 1 max. 1 (A, /A, B, /B, Z, /Z) max. 1 (A, B, (Z)) Nominal output voltage: 5 VÃDC 24 VÃDC Voltage range: 4.75 VÃDC ... 5.25 VÃDC 19.2 VÃDC ... 30 VÃDC Current carrying capacity: max. 250 mA Protective circuit: Short-circuit protection; Electrical and thermal Short-circuit protection; Electronic and thermal Designation: Symmetrical incremental encoders Asymmetrical incremental encoder Encoder supply voltage: 5 VÃDC 24 VÃDC 5 VÃDC 24 VÃDC Signal voltage level: Differential signal (signal Ã¢Ã¢¬Ã¢ inverted signal)ÃÃ±0.5ÃV, minimum; Ã±6ÃV, maximum Low Ã¢Ã¢°¤ 2.5 V, high Ã¢Ã¢°¥ 3.5 V (up to 27 V, maximum) Common mode voltage range signal - ground: -10 VÃDC ... 13.2 VÃDC Input frequency: max. 300 kHz Potentials: Communications power (U Supply voltage: 7.5 V (via voltage jumper) Current draw: max. 80 mA Power consumption: max. 600 mW Potentials: Main circuit supply (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 1 A typ. 340 mA Electrical isolation/isolation of the voltage ranges Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VÃAC, 50 Hz, 1 min. Test voltage: 24ÃV supply (I/O) / functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: 7.5ÃV supply (bus logic)/functional ground: 500 VÃAC, 50 Hz, 500 min.
Connection data	Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting