Not available 
| Product properties | IEC power supply system: DC Type: Male Product type: Device protection Number of positions: 2 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 Arrester can be tested with CHECKMASTER from software version:: From SW rev. 1.00 IEC test classification: III T3 EN type: T3 Number of ports: One |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/40032efc4a305a41a7ebbdfd90d81bc4/-S204x204-FJPG Width: 17.5 mm Height: 44.8 mm Depth: 51.7 mm Horizontal pitch: 1 Div. Complete module width: 17.7 mm Complete module height: 90 mm Complete module depth: 65.5 mm |
| Material specifications | Color: Copper Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6 Housing material: PA 6.6 |
| Protective circuit | Mode of protection: L-N L-PE N-PE (L+) - (L-) (L+/L-) - PE Direction of action: 1L-N & N-PE Nominal voltage UN: 48 VDC Maximum continuous voltage UC: 60 VDC Rated load current IL: 26 A (30°C) Residual current IPE: ⤠10 µA Nominal discharge current In (8/20) µs: 500 A Combination wave UOC: 1 kV (2 é) Voltage protection level Up: ⤠120 V Response time tA (L-N): ⤠1 ns Response time tA (L-PE): ⤠1 ns Short-circuit current rating ISCCR: 200 A (without backup fuse for UC) Max. backup fuse with branch wiring: 50 A (gG) |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % |
| Standards and regulations | Standards/specifications: EN61643-11 IEC 61643-11 Note: 2012 2011 |
| Mounting | Mounting type: on base element |
| ECLASS | ECLASS-11.0: 27130806 ECLASS-13.0: 27171203 |
| ETIM | ETIM 9.0: EC000942 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
