Industrial Automation
VAL-CP-N/PE-350-ST - Type 2 surge protection plug
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | IEC test classification: II T2 EN type: T2 IEC power supply system: TN TT Type: DIN rail module, two-section, divisible Product type: Replacement plug Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
Connection data | Connection method: pluggable |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/7223de15cef3d94b83d8e68013f32ea5/-S204x204-FJPG Width: 11.7 mm Height: 46.4 mm Depth: 56.4 mm Horizontal pitch: 0.6 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PBT-FR Material group: I Housing material: PBT-FR |
Protective circuit | Mode of protection: N-PE Direction of action: N-PE Nominal voltage UN: 240VAC (TN - only N-PE) 240VAC (TT - only N-PE) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous operating voltage UC (N-PE): 264 VAC Residual current IPE: ⤠1 µA Nominal discharge current In (8/20) µs (N-PE): 20 kA Maximum discharge current Imax (8/20) µs (N-PE): 40 kA Follow current interrupt rating Ifi (N-PE): 100 A (264 V AC) Voltage protection level Up (N-PE): ⤠1.5 kV Residual voltage Ures (N-PE): ⤠0.5 kV (at In) ⤠0.5 kV (at 10 kA) ⤠0.5 kV (at 5 kA) ⤠0.5 kV (at 4 kA) ⤠0.5 kV (at 2 kA) TOV behavior at UT (N-PE): 1200 VAC (200ms / withstand mode) Response time tA (N-PE): ⤠100 ns |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
Approvals | UL specifications Maximum continuous operating voltage MCOV (N-G): 264 VAC Nominal discharge current In (N-G): 20 kA Mode of protection: N-G Power distribution system: Single phase Nominal frequency: 50/60 Hz Measured limiting voltage MLV (N-G): 950 V Follow current (L-G): 200 A (264 VAC) SPD Type: 4CA |
Standards and regulations | Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 |
Mounting | Mounting type: on base element |
ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
ETIM | ETIM 9.0: EC002496 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products