Industrial Automation
MINI-PS- 48- 60DC/24DC/1 - DC/DC converter
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 48 - 60VDC, output: 24VDC/1A
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Input data | DC operation Nominal input voltage range: 48 VDC ... 60 VDC Input voltage range: 36 VDC ... 75 VDC Wide-range input: yes Input voltage range DC: 36 VDC ... 75 VDC Voltage type of supply voltage: DC Inrush current: < 15 A (typical) Inrush current integral (I2t): 1.8 A2s Frequency range DC: 0 Hz Mains buffering time: typ. 15 ms (48VDC) typ. 20 ms (60VDC) Current consumption: 0.6 A (48VDC) 0.5 A (60VDC) Typical response time: < 0.5 s Input fuse: 3.15 A (slow-blow, internal) |
Output data | Efficiency: > 85 % (at 60 V DC and nominal values) Output characteristic: U/I Nominal output voltage: 24 VDC ±1% Setting range of the output voltage (USet): 22.5 VDC ... 28.5 VDC (> 24 VDC, constant capacity restricted) Nominal output current (IN): 1 A (-25°C...60°C) Derating: 60°C ... 70°C (2.5%/K) Residual ripple: < 40 mVPP Output power: 24 W Peak switching voltages nominal load: < 50 mVPP (20MHz) Maximum no-load power dissipation: < 1.2 W Power loss nominal load max.: < 5 W Connection in parallel: yes, for assembling redundant systems and increasing efficiency Connection in series: yes Signal: DC OK active Output description: UOUT > 21.5 V: High signal Maximum switching voltage: ⤠24 VDC Output voltage: + 24 V (Signal) Continuous load current: ⤠20 mA |
Connection data | Input Connection method: Pluggable screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 7 mm Screw thread: M3 Output Connection method: Pluggable screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 7 mm Screw thread: M3 Signal Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm |
Signaling | Types of signaling: LED Active switching output Operating voltage display: Green LED Signal output: DC OK active Status display: "DC OK" LED green |
Electrical properties | Number of phases: 1.00 Insulation voltage input/output: 1.5 kV (type test) 1 kV (routine test) |
Product properties | Product type: DC/DC converters MTBF (IEC 61709, SN 29500): > 1147000 h (40°C) Insulation characteristics Protection class: II |
Dimensions | Width: 22.5 mm Height: 99 mm Depth: 107 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm (⤠70°C) Installation distance top/bottom: 50 mm / 50 mm (⤠70°C) |
Mounting | Assembly instructions: alignable: horizontally 0mm, vertically 50mm Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: No |
Material specifications | Housing material: Plastic Polyamide (PA) Type of housing: Polyamide PA, color: green |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (>60°C Derating: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Max. permissible relative humidity (operation): ⤠95 % (at 25°C, non-condensing) |
Standards and regulations | Rail applications: EN50121-4 Standard â Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN50178/VDE0160 (PELV) Standard - Electrical safety: EN60950-1/VDE0805 (SELV) Standard - Safe isolation: DINVDE0100-410 DINVDE0106-101 |
Approvals | UL approvals: UL/C-UL listed UL508 UL/C-UL Recognized UL60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55011 (EN 55022) Electrostatic discharge Standards/regulations: EN61000-4-2 Housing: > Level 3 Electrostatic dischargeâ Contact discharge: 8 kV (Contact discharge) Discharge in air: 8 kV (Air discharge) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 3 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 4 kV (level 4 - asymmetrical: conductor to ground) Output: 2 kV (level 3 - asymmetrical: conductor to ground) Signal: 1 kV Comments: Level 2 - asymmetrical cable to ground Surge voltage load (surge) Standards/regulations: EN61000-4-5 Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Input/Output: Level 3 Frequency range: 0.15 MHz ... 80 MHz (10V) Voltage dips Standards/regulations: EN61000-4-11 Emitted interference Standards/regulations: EN61000-6-3 Radio interference voltage in acc. with EN 55011: EN55011 (EN55022) ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: EN 55011 (EN 55022) Class B, area of application: Industry and residential |
ECLASS | ECLASS-11.0: 27040701 ECLASS-12.0: 27040701 ECLASS-13.0: 27040701 |
ETIM | ETIM 9.0: EC002540 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products