Not available 
| Input data | DC operation Input voltage: 24 VDC Input voltage range: 100 VDC ... 350 VDC Voltage type of supply voltage: DC Inrush current: < 34 A (< 1.1 A2s) Inrush current integral (I2t): < 1.1 A2s Mains buffering time: see diagram Buffer period: 20 min. (2A) Rotary selector switch: Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent Current consumption: 0.6 A 0.85 A (230 V AC) 1.1 A 1.5 A (120VAC) Protective circuit: Varistor Power factor (cos phi): approx. 0.5 Typical response time: 100 ms Input fuse: 3.15 A (slow-blow, internal) Permissible backup fuse: B6 B10 B16 Recommended breaker for input protection: 6 A ... 16 A (Characteristics B, C, D, K) AC operation Nominal input voltage range: 100 VAC ... 240 VAC Input voltage range: 85 VAC ... 264 VAC Voltage type of supply voltage: AC |
| Output data | Efficiency: > 83 % Nominal output voltage: 24 VDC (AC input voltage available: 22.5 to 29.5 V DC, AC input voltage not available: 27.9 to 19.2 V DC) Setting range of the output voltage (USet): 22.5 VDC ... 29.5 VDC (normal mode; in the buffer mode, dependent on a battery voltage of 27.9 V DC ... 19.2 V DC) Nominal output current (IN): 2 A Output current limit: max. 3 A Bridging time: 1200 s Derating: 60°C ... 70°C (2.5%/K) Feedback voltage resistance: 35 VDC Protection against overvoltage at the output (OVP): < 35 VDC Max. capacitive load: unlimited Control deviation: < 1 % (change in load, static 10 % ... 90 %) Residual ripple: < 50 mVPP Output power: 48 W Peak switching voltages nominal load: < 100 mVPP Maximum no-load power dissipation: 3.8 W Power loss nominal load max.: 15 W Power dissipation: 3.8 W 10.1 W 2.1 W Rise time: < 100 ms Connection in parallel: yes Connection in series: No Mains operation Nominal output voltage: 24 VDC Output voltage range: 22.5 VDC ... 29.5 VDC Nominal output current (IN): 2 A Battery operation Nominal output voltage: 24 VDC Output voltage range: 19.2 VDC ... 27.6 VDC (UOUT = UBAT - 0,5 V DC) Nominal output current (IN): 2 A Signal: Active (high = buffer module is loaded) Output description: Power Good Maximum switching voltage: ⤠24 V Output voltage: + 24 V Continuous load current: ⤠20 mA Signal: Alarm Output description: Relay output Maximum switching voltage: ⤠24 V Output voltage: 24 V Continuous load current: ⤠200 mA Signal: Battery charge Output description: Relay output Maximum switching voltage: ⤠24 V Output voltage: 24 V Continuous load current: ⤠200 mA Signal: Battery mode Output description: Relay output Maximum switching voltage: ⤠24 V Output voltage: 24 V Continuous load current: ⤠200 mA |
| Energy storage | Charging current: 1 A Nominal capacity range: 0.8 Ah ... 1.3 Ah Memory medium: external, battery 0.8Ah / 1.3Ah IQ technology: no Network management: No |
| Connection data | Input Connection method: Pluggable COMBICON screw connections Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Stripping length: 8 mm Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Pluggable COMBICON screw connections Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Stripping length: 8 mm Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm |
| Signaling | Types of signaling: LED Signal output: Active (high = buffer module is loaded) Status display: LED "Power Good", green Note on status display: Buffer module is loaded: LED ON Signal output: Alarm Status display: LED red Note on status display: Malfunction/alarm: LED permanently lit Signal output: Battery charge Status display: LED flashing yellow Note on status display: Battery charge/battery is being charged: LED flashing Signal output: Battery mode Status display: Yellow LED Note on status display: Battery mode/buffer mode: LED permanently lit |
| Electrical properties | Insulation voltage input/output: 4 kV (type test) 2 kV (routine test) |
| Product properties | Product type: DC UPS with integrated power supply Product family: MINIUPS â UPS with integrated power supply IQ technology: no MTBF (IEC 61709, SN 29500): > 753000 h (40°C) Insulation characteristics Protection class: II (in closed control cabinet) Degree of pollution: 2 |
| Dimensions | Width: 67.5 mm Height: 99 mm Depth: 107 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 30 mm / 30 mm |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: alignable: horizontally 0mm, vertically 50mm Mounting position: horizontal DIN rail NS 35, EN 60715 |
| Material specifications | Housing material: Plastic Type of housing: Polyamide PA, color: green |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (>60°C Derating: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): 95 % (at 25°C, non-condensing) Shock: 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Vibration (operation): < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) 15 Hz ... 150 Hz, 2.3g, 90 min. |
| Standards and regulations | Rail applications: EN50121-4 Standard â Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN50178/VDE0160 (PELV) Standard - Electrical safety: EN60950-1/VDE0805 (SELV) EN61558-2-17 Standard â Protection against shock currents, basic requirements for protective separation in electrical equipment: EN50178 Standard â Safety extra-low voltage: EN60950-1 (SELV) EN60204 (PELV) Standard - Safe isolation: DINVDE0100-410 |
| Approvals | UL approvals: UL Listed UL508 UL/C-UL Recognized UL60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
| EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55011 (EN 55022) Electrostatic discharge Standards/regulations: EN61000-4-2 Housing: Level 3 Electrostatic dischargeâ Contact discharge: 6 kV Discharge in air: 8 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 2 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 4 kV (level 4 - asymmetrical: conductor to ground) Output: 2 kV (level 3 - asymmetrical: conductor to ground) Signal: 1 kV (level 2 - asymmetrical: conductor to ground) Comments: Criterion B Surge voltage load (surge) Standards/regulations: EN61000-4-5 Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ I/O/S: Level 3 Frequency range: 10 kHz ... 80 MHz Comments: Criterion A Voltage: 10 V Voltage dips Standards/regulations: EN61000-4-11 Emitted interference Standards/regulations: EN61000-6-3 Radio interference voltage in acc. with EN 55011: EN55011 (EN55022) ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| ECLASS | ECLASS-11.0: 27040705 ECLASS-12.0: 27040705 ECLASS-13.0: 27040705 |
| ETIM | ETIM 9.0: EC000382 |
| UNSPSC | UNSPSC 21.0: 39121000 |
Description other products
