Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2881887
PHOENIX CONTACTNot available

FLT-CP-350-ST - Type 1 surge protection plug

Type 1 / Class I / B arrester (lightning current arrester) replacement plug for paths L-N and L-PEN, can be combined with FLASHTRAB compact series of products.
Product Code: 2881887
Partner cod.: 2881887
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
NotesGeneral
Note: Only in parallel connection with VAL-CP-350-ST. The technical parameters are based on the combination of the two products.
Product propertiesIEC test classification: I / II
T1 / T2
EN type: T1 / T2
IEC power supply system: TN
TT
Type: Male
Product type: Replacement plug
Number of positions: 1
Surge protection fault message: optical
Insulation characteristics
Overvoltage category: III
Pollution degree: 2
Electrical propertiesNominal frequency fN: 50 Hz (60Hz)
Connection dataConnection method: pluggable
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/038e214852cb3e4586b3b6b37bf6da5a/-S204x204-FJPG
Width: 23.5 mm
Height: 46.6 mm
Depth: 56.4 mm
Horizontal pitch: 2 Div.
Material specificationsFlammability rating according to UL 94: V-0
CTI value of material: 600
Insulating material: PA 6.6/PBT
Material group: I
Housing material: PBT
Protective circuitMode of protection: L-PEN
L-N
Direction of action: L-N / L-PEN
Nominal voltage UN: 240VAC (TN)
240VAC (TT)
Nominal frequency fN: 50 Hz (60Hz)
Maximum continuous voltage UC: 350 VAC
Nominal discharge current In (8/20) µs: 25 kA
Impulse discharge current (10/350)µs, charge: 12.5 As
Impulse discharge current (10/350)µs, specific energy: 160 kJ/Ω
Impulse discharge current (10/350)µs, peak value limp: 25 kA
Follow current interrupt rating Ifi: 25 kA (264 V AC)
3 kA (350 V AC)
Short-circuit current rating ISCCR: 25 kA (264 V AC)
3 kA (350 V AC)
Voltage protection level Up: ≤ 1.5 kV
Residual voltage Ures: ≤ 1.5 kV (at In)
≤ 1.2 kV (at 10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs: ≤ 1.5 kV
TOV behavior at UT: 415 VAC (5s / withstand mode)
457 VAC (120min / safe failure mode)
Response time tA: ≤ 25 ns
Max. backup fuse with branch wiring: 315 A (gG)
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -40°C ... 80°C
Ambient temperature (storage/transport): -40°C ... 80°C
Altitude: ≤ 2000 m (amsl)
Permissible humidity (operation): 5 % ... 95 %
Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation): 5g (5 - 500 Hz/2.5 h/X, Y, Z)
ApprovalsUL specifications
Maximum continuous operating voltage MCOV (L-N): 264 VAC
Nominal discharge current In (L-N): 20 kA
Mode of protection: L-N
Nominal voltage: 240VAC
Power distribution system: Split phase
Nominal frequency: 50/60 Hz
Measured limiting voltage MLV (L-N): 1340 V
Follow current (L-N): 10 kA (264 V AC)
SPD Type: 4CA
Standards and regulationsAir clearances and creepage distances
Standards/regulations: IEC 664-1 / IEC 61643-1 / IEC 61643-11
Standards/specifications: IEC 61643-11
EN61643-11
Note: 2011
2012
MountingMounting type: on base element
Technical Specs
ECLASSECLASS-11.0: 27130802
ECLASS-13.0: 27171201
ETIMETIM 9.0: EC000381
UNSPSCUNSPSC 21.0: 39121600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00200.pdf

Flyer_00001.pdf

Flyer_00002.pdf

Manufacturer_declaration_00577.pdf

Manufacturer_declaration_01992.pdf

Package_slip_00291.pdf