Not available 
| Product properties | Product type: Extension module MTTF: 889 Years (SN29500 standard, temperature25°C, operating cycle21%) 391 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 151 Years (SN29500 standard, temperature40°C, operating cycle100%) Insulation characteristics Overvoltage category: II Degree of pollution: 2 |
| Electrical properties | Electrical isolation: 300 V (Rated insulation voltage (in each case between the digital inputs // digital outputs //TBUS supply, reinforced insulation in accordance with EN/IEC 61010)) 50 V (Rated insulation voltage (in each case between the analog inputs / analog outputs /TBUS supply, reinforced insulation in accordance with EN/IEC 61010)) 300 V (Rated insulation voltage (in each case between the digital inputs and outputs // analog inputs and outputs, reinforced insulation in accordance with EN/IEC 61010)) 300 V (Rated insulation voltage (to adjacent devices, basic insulation in accordance with EN/IEC 61010)) Test voltage for digital I/Os: 2.5 kV AC (50Hz, 1min.) Test voltage for analog I/Os: 1.5 kV AC (50Hz, 1min.) Maximum power dissipation for nominal condition: 2.28 W Transient surge protection: Yes Supply Supply voltage range: 19.2 VDC ... 30.5 VDC (DIN rail connector) Max. current consumption: ⤠95 mA (At 24 V DC, at 25°C) |
| Input data | Digital Max. current consumption: < 1 mA Analog Description of the input: Analog input Number of inputs: 1 Current input signal: 0 mA ... 20 mA (can be set via DIP switches) 4 mA ... 20 mA (can be set via DIP switches) Max. current input signal: 22 mA Input resistance current input: < 70 é Resolution: 16 bit Precision: ⤠0.02 % (at 25°C) Protective circuit: Short-circuit and overload protection Temperature coefficient, typical: typ. 0.0025 %/K (at -40°C ... +70°C) Supply voltage: 12 VDC (UANA via terminal block PWR1, +I1, for passive sensors, 25mA) Digitalâ Description of the input: Digital input Number of inputs: 2 Voltage input signal: 0 V AC/DC ... 250 V AC/DC Switching level "0" signal: 0 V AC/DC ... 4 V AC/DC (Low-voltage input) 0 V AC/DC ... 20 V AC/DC (High-voltage input) Switching level "1" signal: 10 V AC/DC ... 50 V AC/DC (Low-voltage input) 50 V AC/DC ... 250 V AC/DC (High-voltage input) Input frequency: ⤠2 Hz |
| Output data | Digital Output name: Relay output Number of outputs: 2 Contact switching type: Changeover contact Contact material: AgSnO2 Maximum switching voltage: 250 V AC/DC Min. switching current: ⥠10 mA Max. switching current: 2 A (250VAC) 0.168 A (250VDC) 2 A (24VDC) Mechanical service life: 1x 107 cycles Electrical service life: 2x 105 cycles (At 2 A, 250 VAC, cosà 0.4) 2x 105 cycles (At 1 A, 24 V DC, L/R = 48 ms) Maximum switching frequency: 2 Hz Behavior of the outputs (adjustable via DIP switch): Hold / Reset Analog Output name: Analog output Number of outputs: 1 Voltage output signal: 0 V ... 10 V Max. voltage output signal: ~ 10.83 V Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA Max. current output signal: ~ 21.67 mA Load: ⥠10 ké ⤠500 é Resolution: 16 bit Precision: ⤠0.02 % (at 25°C) typ. 0.5 % (Voltage output) Temperature coefficient, typical: typ. 0.0025 %/K (at -40°C ... +70°C) Protective circuit: Transient protection of outputs |
| Connection data | Tightening torque: 0.5 Nm ... 0.6 Nm 5 lbf-in. ... 7 lbf-in. Connection method: Screw connection Stripping length: 7 mm Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 |
| Signaling | Status display: Green LED (supply voltage, PWR) Green LED (bus communication, DAT) Red LED (periphery error, ERR) Yellow LED (digital input, DI1) Yellow LED (digital input, DI2) Yellow LED (digital output, DO1) Yellow LED (digital output, DO2) |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2cf50fa12a76e642a87bbf025fee56a1/-S204x204-FJPG Width: 17.5 mm Height: 113 mm Depth: 114.5 mm |
| Material specifications | Material: PA 6.6-FR Flammability rating according to UL 94: V0 |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C (>55°Cderating, see technical documentation) -40°F ... 158°F (>131°Fderating, see technical documentation) Ambient temperature (storage/transport): -40°C ... 85°C -40°F ... 185°F Altitude: 2000 m Permissible humidity (operation): 20 % ... 85 % Permissible humidity (storage/transport): 20 % ... 85 % Shock: 16g, 11 ms Vibration (operation): in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant ATEX Identification: ï II 3 G Ex ec nC IIC T4 Gc Certificate: IBExU15ATEXB008X Note: Please follow the special installation instructions in the documentation! IECEx Identification: Ex ec nC IIC T4 Gc Certificate: IECExIBE13.0019X EACEx Identification: 2Ex nA nC IIC T4 Gc X Certificate: RU C-DE.HB49.B.00033/20 UL, USA/Canada Identification: 508 Listed Class I, Div. 2, Groups A, B, C, D T4A Class I, Zone 2, IIC T4 CCC/China-Ex Identification: Ex ec nC IIC T4 Gc Certificate: 2022122310115625 KC approval for South Korea Certificate: R-R-PCK-2901533 Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A |
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU |
| Standards and regulations | Standard designation: EMC Directive 2014/30/EU Ex Directive (ATEX) Ex Directive (ATEX) Standards/specifications: EN61000-6-2 EN61000-6-4 EN60079-0 EN60079-15 |
| Mounting | Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715 Mounting position: any |
| ECLASS | ECLASS-11.0: 27242602 ECLASS-12.0: 27242602 ECLASS-13.0: 27242602 |
| ETIM | ETIM 9.0: EC001597 |
| UNSPSC | UNSPSC 21.0: 32151602 |
Description other products
