| Product properties | Product type: Wireless module
Application: I/O
RS-232
RS-485
Operating mode: I/O data (Default setting, configuration via thumbwheel)
Serial data (Activation and configuration via PSI-CONF software)
PLC/Modbus RTU mode (Activation and configuration via PSI-CONF software)
PLC / Modbus RTU dual mode (Activation and configuration via PSI-CONF software)
MTTF: 778 Years (SN29500 standard, temperature25°C, operating cycle21%)
358 Years (SN29500 standard, temperature40°C, operating cycle34.25%)
142 Years (SN29500 standard, temperature40°C, operating cycle100%)
Insulation characteristics
Overvoltage category: II
Degree of pollution: 2
|
| Electrical properties | Rated insulation voltage: 60 V (In accordance with EN/IEC 60079-7)
Maximum power dissipation for nominal condition: 1.56 W
Transient surge protection: Yes
System limits
Designation: Wireless module
Number of supported devices: ⤠250 (Addressing via PSI-CONF software)
⤠99 (Addressing via thumbwheel)
Number of possible extension modules: ⤠32 (per wireless module)
System limitsâ
Designation: Wireless network
I/O data mode: ⤠99 (I/O extension modules per wireless network, serial interfaces deactivated)
Serial data mode: 0 (no I/O extension modules can be used)
PLC/Modbus RTU mode: ⤠99 (I/O extension modules per wireless network, access to extension modules via Modbus RTU protocol)
Supply
Supply voltage: 24 VDC
Supply voltage range: 19.2 VDC ... 30.5 VDC
Max. current consumption: ⤠65 mA (at 24V DC, at 25°C, stand-alone)
⤠6 A (at 24VDC, with DIN rail connector at full capacity)
|
| Output data | Digital
Output name: RF link relay output
Number of outputs: 1
Contact switching type: Changeover contact
Contact material: PdRu, gold-plated
Maximum switching voltage: 30 V AC/DC
60 VDC
Max. switching current: 500 mA (30VAC/DC)
300 mA (60VDC)
Electrical service life: 5x 105 switching cycles with 0.5 A at 30 V DC
Analog
Output name: RSSI voltage output
Number of outputs: 1
Voltage output signal: 0 V ... 3 V
|
| Connection data | Connection method: Screw connection
Stripping length: 7 mm
Conductor cross section, rigid min.: 0.2 mm²
Conductor cross section, rigid max.: 2.5 mm²
Conductor cross section flexible min.: 0.2 mm²
Conductor cross section flexible max.: 2.5 mm²
Conductor cross section AWG min.: 24
Conductor cross section AWG max.: 14
|
| Interfaces | Wireless
Range: ± 5 km (The range may be considerably above or below that stated, and depends on the environment, antenna technology, and the product used)
Serial: RS-232
Data rate: 300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps
Connection method: COMBICON plug-in screw terminal block
Connection technology: 3-conductor
Transmission length: ⤠15 m
Serial: RS-485
Data rate: 300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps / 187.5 kbps
Connection method: COMBICON plug-in screw terminal block
Connection technology: 2-conductor
Transmission length: ⤠1200 m
Termination resistor: 390 é (switchable via DIP switches)
150 é (switchable via DIP switches)
390 é (switchable via DIP switches)
Serial: Configuration interface
Connection method: S-PORT (socket)
Wirelessâ
Interface description: Trusted Wireless
Direction: Bi-directional
Frequency: 2400 MHz
Frequency range: 2.4002 GHz ... 2.4785 GHz
Channel distance: 1.3 MHz
Number of channel groups: 8
Number of channels per group: 55
Transmit capacity, minimum: 0 dBm
Transmit capacity, maximum: ⤠20 dBm (100mW, outside of Europe, adjustable via software)
⤠19 dBm (Europe, can be set via software, depends on the data rate)
18 dBm (Default setting, adjustable)
Data rate: 16 kbps (adjustable)
125 kbps (Default setting, adjustable)
250 kbps (adjustable)
Minimum receiver sensitivity: -106 dBm (16 kbps)
-96 dBm (125kbps)
-93 dBm (250 kbps)
Antenna connection method: RSMA (female)
Security: 128-bit data encryption
Functions
Wireless licenses: Europe, USA, Canada, additional countries in the e-shop
Wirelessââ
Frequency band: 2.4 GHz
Wireless standard: Trusted Wireless
|
| Signaling | Status display: Green LED (supply voltage, PWR)
Green LED (bus communication, DAT)
Red LED (periphery error, ERR)
3x green, 1x yellow LED (LED bar graph receive quality, RSSI)
GreenLED (receive data, RX)
GreenLED (transmit data, TX)
|
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2cf50fa12a76e642a87bbf025fee56a1/-S204x204-FJPG
Width: 17.5 mm
Height: 116 mm
Depth: 114.5 mm
|
| Material specifications | Material: PA 6.6-FR
Flammability rating according to UL 94: V0
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -40°C ... 70°C (>55°Cderating, see technical documentation)
-40°F ... 158°F (>131°Fderating, see technical documentation)
Ambient temperature (storage/transport): -40°C ... 85°C
-40°F ... 185°F
Altitude: 2000 m
Permissible humidity (operation): 20 % ... 85 %
Permissible humidity (storage/transport): 20 % ... 85 %
Shock: 16g, 11 ms
Vibration (operation): in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
|
| Approvals | CE
Certificate: CE-compliant
UKCA
Certificate: UKCA-compliant
ATEX
Identification: ï II 3 GEx ec nC IIC T4 Gc
Certificate: IBExU15ATEXB008X
Note: Please follow the special installation instructions in the documentation!
IECEx
Identification: Ex ec nC IIC T4 Gc
Certificate: IECExIBE13.0019X
EACEx
Identification: 2Ex nA nC IIC T4 Gc X
Certificate: RU C-DE.HB49.B.00033/20
UL, USA/Canada
Identification: 508 Listed
Class I, Div. 2, Groups A, B, C, D T4A
Class I, Zone 2, IIC T4
CCC/China-Ex
Identification: Ex ec nC IIC T4 Gc
Certificate: 2022122310115624
Wireless approval, Europe
Note: RED 2014/53/EU
Wireless approval USA, FCC
Certificate: YG3RAD2400A
Note: FCC directive, part 15.247
Wireless approval Australia, RCM
Certificate: -
Wireless approval Brazil, ANATEL
Certificate: 06279-19-06497
Wireless approval India, WPC
Certificate: NER-ETA/314
Wireless approval Canada, IC
Certificate: 4720B-RAD2400A
Note: ISC directive RSS 210
Wireless approval Morocco, ANRT
Certificate: MR 10464 ANRT 2015
Wireless approval Mexico, IFT
Certificate: IFTRCPPHRA17-1112
KC approval for South Korea
Certificate: MSIP-CRI-PCK-2901541
KC-s
Certificate: KTL 20-KA4BO-0146X
Wireless approval Taiwan, NCC
Certificate: CCAJ18LP1990T7
Wireless approval United Arab Emirates, TRA
Certificate: ER0126713
Corrosive gas test
Identification: ISA-S71.04-1985 G3 Harsh Group A
|
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations: EN61000-4-2
Electrostatic dischargeâ
Contact discharge: ± 6 kV (Test Level 3)
Discharge in air: ± 8 kV (Test Level 3)
Indirect discharge: ± 6 kV
Comments: Criterion B
Electromagnetic HF field
Standards/regulations: EN61000-4-3
Electromagnetic HF fieldâ
Frequency range: 26 MHz ... 3 GHz (Test Level 3)
Field intensity: 10 V/m
Comments: Criterion A
Fast transients (burst)
Standards/regulations: EN61000-4-4
Fast transients (burst)â
Input: ± 2 kV (Test Level 3)
Signal: ± 2 kV
Comments: Criterion B
Surge current load (surge)
Standards/regulations: EN61000-4-5
Surge current load (surge)â
Input: ± 0.5 kV (symmetrical)
± 1 kV (asymmetrical)
Signal: ± 1 kV (asymmetrical)
Comments: Criterion B
Conducted interference
Standards/regulations: EN61000-4-6
Conducted interferenceâ
Frequency range: 0.15 MHz ... 80 MHz
Comments: Criterion A
Voltage: 10 V
Emitted interference
Emitted radio interference in acc. with EN 55011: EN55016-2-3 Class A industrial applications
Criteria
Criterion A: Normal operating behavior within the specified limits.
Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
|
| Standards and regulations | Standard designation: Ex Directive (ATEX)
Standards/specifications: EN60079-0
EN60079-15
EN300328
EN61000-6-4
EN61000-6-2
EN50371
EN60950-1
|
| Mounting | Mounting type: DIN rail mounting
Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715
|
Not available 
