| Notes | Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Utilization restrictionâ
CCCex note: Use in potentially explosive areas is not permitted in China.
|
| Product properties | Product type: Media converter
MTTF: 1400 Years (SN29500 standard, temperature25°C, operating cycle21%)
599 Years (SN29500 standard, temperature40°C, operating cycle34.25%)
101 Years (SN29500 standard, temperature40°C, operating cycle100%)
MTBF: 492 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
133 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Signal delay: ± 1.3 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size)
|
| System properties | Functionality
Basic functions: Store-and-forward media converter
|
| Electrical properties | Electrical isolation: according to IEEE 802.3
VCC // FE // Ethernet
Maximum power dissipation for nominal condition: 2.64 W
Test voltage data interface/power supply: 0.5 kVrms (50Hz, 1min.)
Supply
Supply voltage range: 18 VDC ... 30 VDC (Screw connection)
18 VDC ... 30 VDC (as an alternative or redundant, via backplane bus contact and system current supply)
Typical current consumption: < 110 mA (24VDC)
Protective circuit: Reverse polarity protection
|
| Connection data | Supply
Connection method: Plug-in screw terminal block (COMBICON), redundancy possible
Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible [AWG]: 24 ... 14
Tightening torque: 0.56 Nm ... 0.79 Nm
|
| Interfaces | Signal: Ethernet
Basic functions: Store-and-forward media converter
Data: optical FO
Transmit capacity, minimum: ⥠-14 dBm ((9/125µm) dynamic in link mode (average))
Transmit capacity, maximum: ⤠-8 dBm ((9/125µm) dynamic in link mode (average))
Transmission length incl. 3 dB system reserve: 38 km (F-E 9/125 0.36dB/km)
34 km (F-E 9/125 0.4dB/km)
28 km (F-E 9/125 0.5dB/km)
21 km (F-G 62.5/125 0.7dB/km F 1000)
5.5 km (F-G 62.5/125 2.6dB/km F 600)
21 km (F-G 50/125 0.7dB/km F 1200)
9 km (F-G 50/125 1.6dB/km F 800)
Connection method: SC simplex
Wavelength: 1550 nm (Send)
1310 nm (Receiving)
Minimum receiver sensitivity: min. -31 dBm (dynamic in link mode (average))
Maximum receiver sensitivity: -3 dBm (dynamic in link mode (average))
Transmission medium: Multi-mode fiberglass
Single-mode fiberglass
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Transmission speed: 10/100 Mbps
Connection method: RJ45 jack, shielded
No. of channels: 1
Transmission length: 100 m (shielded twisted pair)
Transmission medium: Copper
Signal LEDs: Activity, link status, 10/100 Mbps
Auto-negotiation modes: Auto
Link through: Link fault pass through
MDI-/MDI-X switchover: Auto-MDI(X)
|
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/271123d2420e034dbb55e8f273042866/-S204x204-FJPG
Width: 22.5 mm
Height: 99 mm
Depth: 114.5 mm
|
| Material specifications | Material: PA 6.6-FR
|
| Cable/line | FO cable
Fiber types: 50/125 µm
62.5/125 µm
Fiberglass
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -40°C ... 65°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ⤠5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
⤠2000 m (in acc. with UL)
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
|
| Approvals | CE
Certificate: CE-compliant
ATEX
Identification: ï II 3 G Ex nA IIC T4 Gc X
Note: Please follow the special installation instructions in the documentation!
UL, USA/Canada
Identification: 508 Listed
Class I, Zone 2, AEx nA IIC T4
Class I, Zone 2, Ex nA IIC T4 Gc X
Class I, Div. 2, Groups A, B, C, D
Corrosive gas test
Identification: ISA-S71.04-1985 G3 Harsh Group A
Shipbuilding
Identification: DNV GL
DNV GL data
Temperature: B
Humidity: A
Vibration: A
EMC: B
Enclosure: Required protection according to the Rules shall be provided upon installation on board
|
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations: EN61000-4-2
Electrostatic dischargeâ
Contact discharge: ± 6 kV (Test Level 3)
Discharge in air: ± 8 kV (Test Level 3)
Indirect discharge: ± 6 kV
Comments: Criterion B
Electromagnetic HF field
Standards/regulations: EN61000-4-3
Electromagnetic HF fieldâ
Frequency range: 80 MHz ... 3 GHz (Test Level 3)
Field intensity: 10 V/m
Comments: Criterion A
Fast transients (burst)
Standards/regulations: EN61000-4-4
Fast transients (burst)â
Input: ± 2 kV (Test Level 3)
Signal: ± 2 kV (Test Level 3)
Comments: Criterion B
Surge current load (surge)
Standards/regulations: EN61000-4-5
Surge current load (surge)â
Input: ± 0.5 kV (DC supply)
Signal: ± 1 kV (Data line, asymmetrical)
Comments: Criterion B
Conducted interference
Standards/regulations: EN61000-4-6
Conducted interferenceâ
Frequency range: 0.15 MHz ... 80 MHz
Comments: Criterion A
Voltage: 10 V
Emitted interference
Standards/regulations: EN55032
Comments: Class A, industrial applications
Criteria
Criterion A: Normal operating behavior within the specified limits.
Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
|
| Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0
Electrical isolation: according to IEEE 802.3
|
| Mounting | Mounting type: DIN rail mounting
|
Not available 
