Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Product properties | Product type: Signal conditioner Product family: MINI Analog No. of channels: 1 Configuration: DIP switches Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Alignment span: ± 2 % Alignment zero: ± 2 % No. of channels: 1 Electrical isolation: 2-way isolation Electrical isolation between input and output: yes Limit frequency (3 dB): approx. 30 Hz Maximum power dissipation for nominal condition: 19 mW Step response (10-90%): approx. 16 ms Maximum temperature coefficient: 0.01 %/K Temperature coefficient, typical: 0.005 %/K Maximum transmission error: < 0.1 % (of final value) < 0.2 % (Without adjustment) Electrical isolation Input/output Rated insulation voltage: 50 V AC/DC Test voltage: 1.5 kV AC (50Hz, 60s) Insulation: Basic insulation in accordance with IEC/EN61010 Supply Supply voltage range: loop-powered, no external supply necessary Power consumption: 28 mW (without signal) |
| Input data | Signal: Voltage/current Number of inputs: 1 Voltage input signal: 0 mV ... 1000 mV 0 mV ... 750 mV 0 mV ... 500 mV 0 mV ... 300 mV 0 mV ... 250 mV 0 mV ... 200 mV 0 mV ... 150 mV 0 mV ... 125 mV 0 mV ... 120 mV 0 mV ... 100 mV 0 mV ... 75 mV 0 mV ... 60 mV 0 mV ... 50 mV 0 V ... 10 V 0 V ... 7.5 V 0 V ... 5 V 0 V ... 3 V 0 V ... 2.5 V 0 V ... 2 V 0 V ... 1.5 V 0 V ... 1.25 V 0 V ... 1.2 V 0 V ... 30 V 0 V ... 25 V 0 V ... 20 V 0 V ... 12.5 V 0 V ... 12 V 0 V ... 15 V -1000 mV ... 1000 mV -750 mV ... 750 mV -500 mV ... 500 mV -300 mV ... 300 mV -250 mV ... 250 mV -200 mV ... 200 mV -125 mV ... 125 mV -120 mV ... 120 mV -150 mV ... 150 mV -100 mV ... 100 mV -75 mV ... 75 mV -60 mV ... 60 mV -50 mV ... 50 mV -10 V ... 10 V -7.5 V ... 7.5 V -5 V ... 5 V -3 V ... 3 V -2.5 V ... 2.5 V -2 V ... 2 V -1.25 V ... 1.25 V -1.2 V ... 1.2 V -1.5 V ... 1.5 V -30 V ... 30 V -25 V ... 25 V -20 V ... 20 V -12.5 V ... 12.5 V -12 V ... 12 V -15 V ... 15 V 200 mV ... 1000 mV 150 mV ... 750 mV 100 mV ... 500 mV 60 mV ... 300 mV 50 mV ... 250 mV 40 mV ... 200 mV 25 mV ... 125 mV 24 mV ... 120 mV 30 mV ... 150 mV 20 mV ... 100 mV 15 mV ... 75 mV 12 mV ... 60 mV 10 mV ... 50 mV 2 V ... 10 V (additional areas can be configured, see table) 1.5 V ... 7.5 V 1 V ... 5 V 0.6 V ... 3 V 0.5 V ... 2.5 V 0.4 V ... 2 V 0.25 V ... 1.25 V 0.24 V ... 1.2 V 0.3 V ... 1.5 V 6 V ... 30 V 5 V ... 25 V 4 V ... 20 V 2.5 V ... 12.5 V 2.4 V ... 12 V 3 V ... 15 V Max. voltage input signal: < 40 V Current input signal: 0 mA ... 40 mA 0 mA ... 30 mA 0 mA ... 20 mA 0 mA ... 12 mA 0 mA ... 10 mA 0 mA ... 8 mA 0 mA ... 7.5 mA 0 mA ... 5 mA 0 mA ... 6 mA 0 mA ... 4 mA 0 mA ... 3 mA 0 mA ... 2.5 mA 0 mA ... 2 mA -40 mA ... 40 mA -30 mA ... 30 mA -20 mA ... 20 mA -12 mA ... 12 mA -10 mA ... 10 mA -8 mA ... 8 mA -7.5 mA ... 7.5 mA -5 mA ... 5 mA -6 mA ... 6 mA -4 mA ... 4 mA -3 mA ... 3 mA -2.5 mA ... 2.5 mA -2 mA ... 2 mA 8 mA ... 40 mA 6 mA ... 30 mA 4 mA ... 20 mA 2.4 mA ... 12 mA 2 mA ... 10 mA 1.6 mA ... 8 mA 1.5 mA ... 7.5 mA 1 mA ... 5 mA 1.2 mA ... 6 mA 0.8 mA ... 4 mA 0.6 mA ... 3 mA 0.5 mA ... 2.5 mA 0.4 mA ... 2 mA Max. current input signal: < 50 mA (Dielectric strength up to 30 V) Input resistance of voltage input: 100 ké (â¤1V) 1 Mé (⥠1 V) Input resistance current input: ⤠50 é |
| Output data | Signal Number of outputs: 1 Configurable/programmable: Yes, preconfigured Current output signal: 4 mA ... 20 mA Max. current output signal: 35 mA (output limit) Load/output load current output: < 1000 é ((UB - 8V) / 22mA) Ripple: < 20 mVPP (at 500 é) |
| Connection data | Connection method: Screw connection Stripping length: 12 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 12 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8450693c9d67004aa7841c306225c8da/-S204x204-FJPG Width: 6.2 mm Height: 93.1 mm Depth: 101.2 mm |
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL508 Listed Class I, Div. 2, Groups A, B, C, D T5 Class I, Zone 2, Group IIC Shipbuilding approval Certificate: DNV GL TAA00002R0 DNV GL data Temperature: B Humidity: B Vibration: B EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Comments: Safety measures must be taken to prevent electrostatic discharge. Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Typical deviation from the measuring range final value: 0.5 % Electromagnetic HF fieldâ Comments: Criterion A Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Typical deviation from the measuring range final value: 2 % Fast transients (burst)â Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Comments: Criterion B Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Typical deviation from the measuring range final value: 0.5 % Conducted interferenceâ Comments: Criterion A |
| Standards and regulations | Electrical isolation: 2-way isolation |
| Mounting | Mounting type: DIN rail mounting Mounting position: any |
Description other products
