2903065 PHOENIX CONTACT - Technology Bsa

DFLK-D15 SUB/F/FKCT - Interface module

The VARIOFACE feed-through module implements a 1:1 connection between plug-in push-in spring-cage connection terminal blocks and a D-SUB miniature female strip (number of positions: 15). A separate ground pick-off is available.

Product Code: 2903065

Partner cod.: 2903065

PHOENIX CONTACT

Product properties	Product type: Interface module Product family: VARIOFACE Number of positions: 15 Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2
Electrical properties	Operating voltage (AC): Ã¢¤ 30 VAC Operating voltage (DC): Ã¢¤ 60 VDC Current (per branch): Ã¢¤ 2.5 A Current (Total current): Ã¢¤ 37.5 A (50°C) Air clearances and creepage distances Rated insulation voltage: 125 V Rated surge voltage: 1.2 kV (1.2/50 Ã¼s)
Connection data	Connection1 (control level) Connection in acc. with standard: IEC 60807-2 Connection method: D-SUB socket strip Screw thread: UNC 4-40 Number of connections: 1 Number of positions: 15 Insertion/withdrawal cycles: > 500 Pitch: 2.74 mm Connection2 (field level) Connection method: Push-in spring connection Stripping length: 10 mm Number of positions: 16 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12
Signaling	Status display present: No
Dimensions	Item dimensions Width: 38 mm Height: 58.4 mm Depth: 46 mm
Material specifications	Housing insulation material: Polyamide PA non-reinforced
Environmental and real-life conditions	Ambient conditions Degree of protection (Module): IP20 Degree of protection (Installation location): Ã¢¥ IP54 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C Altitude: Ã¢¤ 2000 m
Approvals	UKCA Certificate: UKCA-compliant
Standards and regulations	Air clearances and creepage distances Standards/regulations: ENIEC 60664-1
Mounting	Mounting type: Rear mounting Mounting position: any
Notes	General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.