Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2903522
PHOENIX CONTACTNot available

EMD-BL-C-10-PT - Monitoring relay

Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 changeover contact, with Push-in connection
Product Code: 2903522
Partner cod.: 2903522
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesProduct type: Current monitoring relay
Operating mode: 100% operating factor
Mechanical service life: 15x 106 cycles
Insulation characteristics
Insulation: Basic insulation
Insulation characteristics​
Insulation: Basic insulation
Overvoltage category: III
Pollution degree: 2
Electrical propertiesService life electrical: 1x 105 cycles
Mains type: 1-phase
Rated insulation voltage: 300 V (Supply circuit)
250 V (Output circuit)
300 V (Measuring circuit)
Rated surge voltage: 4 kV
Supply
Supply voltage: 230 VAC ±15%
Supply voltage range: 195.5 VAC ... 264.5 VAC
Nominal power consumption: 5 VA (0.8W)
Input dataInput name: Measuring input
Measured value: AC sine (48 Hz ... 63 Hz)
Input current range: 0 A ... 5 A
0 A ... 10 A
Configurable via rotary switches
Overload capacity: 13 A AC
Input resistance current input: 3 mΩ
Frequency range: 48 Hz ... 63 Hz
Maximum temperature coefficient: ≤ 0.05 %
Setting range for response delay: 0.1 s ... 10 s
Min. setting range: 5 % ... 95 % (from IN)
Max. setting range: 10 % ... 100 % (from IN)
Function: Overcurrent
Undercurrent
Window
Basic accuracy: ≤ 5 % (of the nominal value)
Setting accuracy: ± 5 % (of the nominal value)
Repeat accuracy: ≤ 2 %
Recovery time: > 500 ms
Output dataSwitching
Contact switching type: 1 floating changeover contact
Maximum switching voltage: 250 VAC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.: 1250 VA (5A / 250VAC)
Output fuse: 5 A (fast-blow)
Connection dataConnection method: Push-in connection
Stripping length: 8 mm
Conductor cross section rigid: 0.14 mm² ... 2.5 mm²
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
Conductor cross section AWG: 26 ... 14
SignalingStatus display: Yellow LED
Operating voltage display: Green LED
Error indication: Red LED
DimensionsWidth: 17.5 mm
Height: 89.5 mm
Depth: 65.5 mm
Material specificationsHousing insulation material: Polyamide PA 6.6, self-extinguishing
Environmental and real-life conditionsAmbient conditions
Degree of protection (Housing): IP40 (Housing)
Degree of protection (Connection terminal blocks): IP20 (Connection terminal blocks)
Ambient temperature (operation): -25°C ... 55°C
Ambient temperature (storage/transport): -25°C ... 70°C
Climatic class: 3K3 (in acc. with EN 60721)
Permissible humidity (operation): 15 % ... 85 %
ApprovalsCE
Certificate: CE-compliant
UL, USA/Canada
Identification: UL/C-UL Listed UL 508
EMC dataLow Voltage Directive: Conformance with Low Voltage Directive
Noise immunity: EN 61000-6-2
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-3
Standards and regulationsStandards/regulations: DINEN60947-5-1
MountingMounting type: DIN rail mounting
Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715
Mounting position: any
Technical Specs
ECLASSECLASS-11.0: 27371802
ECLASS-12.0: 27371802
ECLASS-13.0: 27371802
ETIMETIM 9.0: EC001440
UNSPSCUNSPSC 21.0: 41113600
Description
Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 PDT, with push-in connection
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Data_sheet_03815.pdf

Manufacturer_declaration_01960.pdf

Manufacturer_declaration_04792.pdf

Package_slip_00995.pdf

Product_information_00033.pdf

Product_information_00618.pdf

Technical_drawing_39806.pdf