2903526 PHOENIX CONTACT - Technology Bsa

EMD-BL-3V-400-PT - Monitoring relay

Monitoring relay for monitoring 3-phase voltages of 400 V AC ±30%, window or window with phase sequence, 1 changeover contact, with Push-in connection

Product Code: 2903526

Partner cod.: 2903526

PHOENIX CONTACT

Product properties	Product type: Voltage monitoring relay Operating mode: 100% operating factor Mechanical service life: 15x 10⁶ cycles Insulation characteristics Insulation: Basic insulation Insulation characteristicsÃ¢ Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Service life electrical: 1x 10⁵ cycles Mains type: 3-phase Rated insulation voltage: 519 V (Supply circuit) 250 V (Output circuit) Rated surge voltage: 4 kV Supply Supply voltage: ±30% (= measuring voltage) Supply voltage range: ±30% (= measuring voltage) Nominal power consumption: 10 VA (1W)
Input data	Input name: Measuring input Measured value: AC sine (48 Hz ... 63 Hz) Nominal input voltage U_N: ±30% (3~ 400/230 V) Frequency range: 48 Hz ... 63 Hz Maximum temperature coefficient: Ã¢¤ 0.05 % Setting range for response delay: 0.1 s ... 10 s Min. setting range: 70 % ... 120 % (From U_N) Max. setting range: 80 % ... 130 % (From U_N) Min setting range of the voltage threshold value: 280 VAC ... 480 VAC Max. setting range of the voltage threshold value: 320 VAC ... 519 VAC Function: Window Phase sequence Basic accuracy: Ã¢¤ 5 % (of the nominal value) Setting accuracy: ± 5 % (of scale end value) Repeat accuracy: Ã¢¤ 2 % Recovery time: > 500 ms
Output data	Switching Contact switching type: 1 floating changeover contact Maximum switching voltage: 250 VAC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max.: 1250 VA (5A / 250VAC) Output fuse: 5 A (fast-blow)
Connection data	Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14
Signaling	Status display: Yellow LED Error indication: Red LED
Dimensions	Width: 17.5 mm Height: 89.5 mm Depth: 65.5 mm
Material specifications	Housing insulation material: Polyamide PA 6.6, self-extinguishing
Environmental and real-life conditions	Ambient conditions Degree of protection (Housing): IP40 (Housing) Degree of protection (Connection terminal blocks): IP20 (Connection terminal blocks) Ambient temperature (operation): -25°C ... 55°C Ambient temperature (storage/transport): -25°C ... 70°C Climatic class: 3K3 (in acc. with EN 60721) Permissible humidity (operation): 15 % ... 85 %
Approvals	CE Certificate: CE-compliant UL, USA/Canada Identification: UL/C-UL Listed UL 508
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-3
Standards and regulations	Standards/regulations: DINEN60947-5-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715 Mounting position: any