Industrial Automation
REL-PR3-120AC/3X1 - Single relay
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Single relay Operating mode: 100% operating factor Mechanical service life: approx. 107 cycles Insulation characteristics Insulation: Basic insulation Insulation characteristicsâ Insulation: Basic insulation Overvoltage category: III Pollution degree: 3 |
Electrical properties | Service life electrical: see diagram Maximum power dissipation for nominal condition: 2.76 W Test voltage (Winding/contact): 2.5 kVrms (50Hz, 1min., winding/contact) Test voltage (Contact/contact): 2.5 kVrms (50Hz, 1min., contact/contact) Test voltage (N/O contact / N/O contact): 2.5 kVrms (50Hz, 1min., N/O contact / N/O contact) Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV |
Input data | Coil side Nominal input voltage UN: 120 VAC Input voltage range: 102 VAC ... 132 VAC (20°C) Mains frequency: 50/60 Hz Drive and function: monostable Drive (polarity): non-polarized Typical input current at UN: 23 mA Typical response time: 5 ms ... 25 ms (depending on phase relation) Typical release time range: 5 ms ... 20 ms (depending on phase relation) |
Output data | Switching Contact switching type: 3 N/O contacts Type of switch contact: Single contact Contact material: AgNi Maximum switching voltage: 440 VAC 250 VDC Minimum switching voltage: 10 V (At 24 mA) Limiting continuous current: 16 A Maximum inrush current: 50 A (20 ms, N/O contacts) Min. switching current: 10 mA (at 24V) Interrupting rating (ohmic load) max.: 384 W (at 24 V DC) 720 W (at 48 V DC) 600 W (at 60 V DC) 660 W (at 110 V DC) 183 W (at 220 V DC) 4000 VA (for 250 V AC) 4000 VA (at 440 V AC) Switching capacity: 1 A (at 24 V, DC13) 1 A (at 120 V, DC13) 1 A (at 220 V, DC13) 1.5 A (at 24 V, AC15) 1.5 A (at 120 V, AC15) 1.5 A (at 240V, AC15) 3-phase motor load: 1500 W (at 400 V, AC3) Motor load according to UL 508: 1/3HP, 120VAC (N/O contact) 1/2HP, 240VAC (N/O contact) |
Connection data | Connection method: Plug-in connection |
Dimensions | Width: 38.6 mm Height: 36.1 mm Depth: 45.5 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: RT I Ambient temperature (operation): -40°C ... 55°C Ambient temperature (storage/transport): -40°C ... 85°C |
Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
Standards and regulations | Standards/regulations: IEC 60664 IEC 61810 |
Mounting | Mounting position: any |
ECLASS | ECLASS-11.0: 27371601 ECLASS-12.0: 27371601 ECLASS-13.0: 27371601 |
ETIM | ETIM 9.0: EC001437 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products