Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2904473
PHOENIX CONTACT 2904473
PHOENIX CONTACTNot available

EM-D-8/4-24DC-IFS - Extension module

For more complex applications with Interface system devices (IFS), the extension module offers digital inputs and outputs for processing additional signals in the field. Easy connection to IFS gateway via the DIN rail connector as the slave.
Product Code: 2904473
Partner cod.: 2904473
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesProduct type: Extension module
Product family: CONTACTRON
Operating mode: 100% operating factor
Insulation characteristics
Overvoltage category: III
Pollution degree: 2
Electrical propertiesSupply
Rated control circuit supply voltage US: 24 VDC -20%...+25%
Rated control supply current IS: 85 mA (plus load current of the outputs)
Protective circuit: Reverse polarity protection
Surge protection
Input dataDigital
Number: 8
Rated actuating voltage UC: 24 VDC ±20%
Triggering voltage range: 19.2 VDC ... 28.8 VDC
Rated actuating current IC: 3 mA
Protective circuit: Reverse polarity protection
Surge protection
Output dataDigital: Switching outputs
Number: 4
Rated output voltage USO: 24 VDC
Residual voltage: 1 V
Maximum switching voltage: 23 VDC (UB - Uresid. of the output)
Max. switching current: 500 mA (per output)
Protective circuit: Parallel protection against polarity reversal, pay attention to the fuse (Fusing with max. 8 A F-fuse)
Connection dataSupply
Connection method: Screw connection
Stripping length: 8 mm
Screw thread: M3
Conductor cross section rigid: 0.2 mm² ... 2 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
Programming connection
Connection method: S-PORT (socket)
Number of connections: 1
Number of positions: 12
INTERFACE system
Connection method: DIN rail bus connectors
Number of connections: 1
Number of positions: 5
InterfacesData: IFS interface
Data rate: 76800 Baud
Serial transmission speed: 76.8kbps
Connection method: DIN rail bus connectors
S-PORT (male connector)
Data: Service interface
Communication protocol: INTERFACE-System
Connection method: S-PORT (socket)
Number of connections: 1
Number of positions: 12
Data: Device bus
Communication protocol: INTERFACE-System
Connection method: DIN rail bus connectors
Number of connections: 1
Number of positions: 5
Transmission speed: 76.8 kbps
DimensionsWidth: 22.5 mm
Height: 99 mm
Depth: 114.5 mm
Material specificationsHousing material: Polyamide PA non-reinforced
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -35°C ... 50°C
Ambient temperature (storage/transport): -35°C ... 80°C
ApprovalsUKCA
Certificate: UKCA-compliant
Standards and regulationsStandards/regulations: EN61131-2
MountingMounting type: DIN rail mounting
Assembly instructions: in rows with zero spacing
Mounting position: any
Technical Specs
ECLASSECLASS-11.0: 27242604
ECLASS-12.0: 27242604
ECLASS-13.0: 27242604
ETIMETIM 9.0: EC001599
UNSPSCUNSPSC 21.0: 32151600
Description
For more complex applications with Interface system devices (IFS), the extension module offers digital inputs and outputs for processing additional signals in the field. Easy connection to IFS gateway via the DIN rail connector as the slave.
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00070.pdf

Approvals_01216.pdf

Approvals_01217.pdf

Manufacturer_declaration_00859.pdf

Manufacturer_declaration_01803.pdf

Manufacturer_declaration_15932.pdf

Package_slip_00988.pdf

Product_information_00033.pdf

Product_information_00635.pdf

Technical_drawing_39948.pdf