Not available 
| Product properties | Product type: Filter terminal block Operating mode: 100% operating factor Area of application: Functional safety Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Maximum power dissipation for nominal condition: 4.8 W Air clearances and creepage distances between the power circuits Rated insulation voltage: 50 V Rated surge voltage: 1.5 kV |
| Input data | Nominal input voltage UN: 24 VÃDC ñ20Ã% (Control voltage UST right/left) Typical input current at UN: max. 20 mA Protective circuit: Surge protection |
| Output data | Nominal output voltage: 24 VÃDC ñ20Ã% (Control voltage UST right/left) Nominal output voltage range: 19.2 VÃDC ... 28.8 VÃDC (Control voltage UST right/left) Limiting continuous current: max. 2 A (in total for OUT1 + OUT2) Load current range: 530 mA |
| Connection data | Control circuits Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Load circuit Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 |
| Dimensions | Width: 6.2 mm Height: 94 mm Depth: 80 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 55°C Ambient temperature (storage/transport): -25°C ... 70°C |
| Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: ENÃ61131 |
| Mounting | Assembly instructions: in rows with zero spacing Mounting position: Vertical (horizontal DIN rail) |
Description other products
