2904508 PHOENIX CONTACT - Technology Bsa

MINI MCR-2-FM-RC-PT - Monitoring block

Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration

Product Code: 2904508

Partner cod.: 2904508

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Product type: Evaluation unit Product family: MINI Analog Pro Configuration: DIP switches Insulation characteristics: GBStandard Overvoltage category: II Pollution degree: 2
System properties	Functionality Configuration: DIP switches
Electrical properties	Rated insulation voltage: 50 V AC/DC (effective) Electrical isolation: Basic insulation in accordance with EN 61010 Test voltage (Input/output): 1.5 kV AC (50Hz, 60s) Maximum temperature coefficient: < 0.01 %/K Electrical isolationÃ¢ Electrical isolation: Input, power supply and output to the switching output Supply Supply voltage range: 9.6 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715) Max. current consumption: < 16 mA (24VDC) Power consumption: < 410 mW (24VDC)
Input data	Signal: Voltage Description of the input: Voltage input for redundancy monitoring Number of inputs: 1 Voltage input signal: 9.9 VDC ... 30 VDC
Output data	Switching: Relay Maximum switching voltage: 30 VDC Max. switching current: 50 mA Signal: Voltage Number of outputs: 1 Voltage output signal: 9.6 VDC ... 29.7 VDC Max. current output signal: 3.2 A
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² (with ferrule) 0.14 mm² ... 2.5 mm² (without ferrule) Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 (flexible)
Ex data	Ex installation (EPL): Gc Div.2
Signaling	Status display: Green LED (supply voltage) Yellow LED (switching output) Error indication: Red LED
Dimensions	Width: 6.2 mm Height: 109.81 mm Depth: 119.2 mm
Material specifications	Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 (not assessed by UL) Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant ATEX Identification: Ã¯ II 3 G Ex ec IIC T4 Gc Certificate: BVS 20 ATEX E 014X UKCAEx(UKEX) Identification: Ã¯ II 3 G Ex ec IIC T4 Gc Certificate: PxCIF21UKEX2902004X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx BVS 20.0010X CCC/China-Ex Identification: Ex nA IIC T4 Gc Certificate: NEPSIGYJ20.1320X UL, USA/Canada Identification: UL508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 Shipbuilding approval Certificate: DNV GL TAA00002UA EACEx Identification: Ã¯ 2Ex ec IIC T4 Gc Certificate: BY/112 02.01 TP012 103.01 00079 DNV GL data Temperature: B Humidity: B Vibration: A EMC: A Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC data	Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Comments: Safety measures must be taken to prevent electrostatic discharge. Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Surge current load (surge) Standards/regulations: EN61000-4-5 Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6
Standards and regulations	Electrical isolation: Basic insulation in accordance with EN 61010 GBStandard Standards/regulations: GB3836.1 GB3836.8
Mounting	Mounting type: DIN rail mounting Mounting position: any