2904612 PHOENIX CONTACT - Technology Bsa

Input data	Control input (configurable) Rem: Output power ON/OFF (SLEEP MODE) Default: Output power ON (>40kÃ¢¦/24 V DC/open bridge between Rem and SGnd) AC operation Network type: Star network Nominal input voltage range: 100 VAC ... 240 VAC Input voltage range: 100 VAC ... 240 VAC -15%...+10% Electric strength, max.: 300 VAC 60 s Typical national grid voltage: 120 VAC 230 VAC Voltage type of supply voltage: AC/DC Inrush current: typ. 12 A (at 25°C) Inrush current integral (I²t): < 1 A²s Inrush current limitation: 12 A (after 1ms) Frequency range (f_N): 50 Hz ... 60 Hz -10%...+10% 16.7 Hz (acc. to EN50163) Mains buffering time: typ. 27 ms (120VAC) typ. 28 ms (230 V AC) Current consumption: 13.6 A (100VAC) 5.4 A (240VAC) Input fuse: 16 A (slow-blow, internal) Recommended breaker for input protection: 16 A ... 20 A (Characteristic B, C, D, K or comparable) Discharge current to PE: < 3.5 mA 1.7 mA (264VAC, 60Hz) DC operation Nominal input voltage range: 110 VDC ... 250 VDC Input voltage range: 110 VDC ... 250 VDC -18%...+40% Voltage type of supply voltage: DC Current consumption: 12 A (110VDC) 5 A (250VDC)
Output data	Efficiency: typ. 95.2 % (120VAC) typ. 96.2 % (230 V AC) Nominal output voltage: 48 VDC Setting range of the output voltage (U_Set): 48 VDC ... 56 VDC (constant capacity) Nominal output current (I_N): 20 A Static Boost (I_Stat.Boost): 22.5 A Dynamic Boost (I_Dyn.Boost): 30 A (5 s) Selective Fuse Breaking (I_SFB): 105 A (15 ms) Magnetic circuit breaker tripping: A1...A20 / B2...B10 / C1...C6 / Z1...Z16 Derating: > 60°C ... 70°C (2.5%/K) Feedback voltage resistance: Ã¢¤ 60 VDC Protection against overvoltage at the output (OVP): Ã¢¤ 60 VDC Control deviation: < 0.5 % (Static load change 10% ... 90%) < 1 % (Dynamic load change 10% ... 90%, (10 Hz)) < 0.25 % (change in input voltage ±10 %) Residual ripple: < 50 mV_PP (with nominal values) Short-circuit-proof: yes No-load proof: yes Output power: 960 W 1080 W 1440 W Maximum no-load power dissipation: < 4 W (120VAC) < 4 W (230 V AC) Power loss nominal load max.: < 51 W (120VAC) < 41 W (230 V AC) Power dissipation SLEEP MODE: < 3 W (120VAC) < 3 W (230 V AC) Crest factor: typ. 1.66 (120VAC) typ. 1.63 (230 V AC) Connection in parallel: yes, for redundancy and increased capacity Connection in series: yes Signal Signal ground SGnd: Reference potential for Out1, Out2, and Rem Signal Out 1 (configurable) Digital: 0 VDC 24 VDC 20 mA Default: 24 VDC 20 mA 24VDC for U_Out >0.9xU_Set Signal Out 2 (configurable) Digital: 0 VDC 24 VDC 20 mA Analog: 4 mA ... 20 mA ±5% (Load Ã¢¤400Ã©) Default: 24 VDC 20 mA 24VDC for P_Out<P_N Signal relay 13/14 (configurable) Default: closed (U_out > 0.9 U_Set) Digital: 24 VDC 1 A 30 V AC/DC 0.5 A
Connection data	Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 4 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 4 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.5 mm² Conductor cross section, rigid max.: 16 mm² Conductor cross section flexible min.: 0.5 mm² Conductor cross section flexible max.: 16 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 16 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 16 mm² Conductor cross section AWG min.: 20 Conductor cross section AWG max.: 6 Stripping length: 10 mm Tightening torque, min: 1.2 Nm Tightening torque max: 1.5 Nm Signal Connection method: Push-in connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 1 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 1.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 0.75 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 1.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 16 Stripping length: 8 mm
Signaling	Types of signaling: LED Floating signal contact Active signal output Out1 (digital, configurable) Active signal output Out2 (analog, configurable) Remote contact Signal ground SGnd Signal output P_Out: > 100% (LED lights up yellow, output power > 960W) > 75% (LED lights up green, output power > 720W) > 50% (LED lights up green, output power > 480W) U_Out: > 0.9xU_Set (LED lights up green) < 0.9xU_Set (LED flashes green)
Electrical properties	Number of phases: 1.00 Insulation voltage input/output: 4 kV AC (type test) 2 kV AC (routine test) Insulation voltage output / PE: 0.5 kV DC (type test) 0.5 kV DC (routine test) Insulation voltage input / PE: 2.5 kV AC (type test) 2.4 kV AC (routine test) Switching frequency: 85 kHz ... 107 kHz (Auxiliary converter stage) 45 kHz ... 200 kHz (Main converter stage) 50 kHz ... 500 kHz (PFC stage)
Product properties	Product type: Power supply Product family: QUINT POWER MTBF (IEC 61709, SN 29500): > 949000 h (25°C) > 569000 h (40°C) > 260000 h (60°C) Environmental protection directive: RoHS Directive 2011/65/EU WEEE Reach Insulation characteristics Protection class: I Degree of pollution: 2 Life expectancy (electrolytic capacitors) Current: 10 A Temperature: 40°C Time: 367000 h Additional text: 120VAC Life expectancy (electrolytic capacitors)Ã¢ Current: 10 A Temperature: 40°C Time: 452000 h Additional text: 230VAC Life expectancy (electrolytic capacitors)Ã¢Ã¢ Current: 20 A Temperature: 25°C Time: 440000 h Additional text: 120VAC Life expectancy (electrolytic capacitors)Ã¢Ã¢Ã¢ Current: 20 A Temperature: 25°C Time: 614000 h Additional text: 230VAC Life expectancy (electrolytic capacitors)Ã¢Ã¢Ã¢Ã¢ Current: 20 A Temperature: 40°C Time: 155000 h Additional text: 120VAC Life expectancy (electrolytic capacitors)Ã¢Ã¢Ã¢Ã¢Ã¢ Current: 40 A Temperature: 40°C Time: 217000 h Additional text: 230VAC
Dimensions	Width: 120 mm Height: 130 mm Depth: 140 mm Installation dimensions Installation distance right/left: 5 mm / 5 mm Installation distance top/bottom: 50 mm / 50 mm
Mounting	Mounting type: DIN rail: 35 mm Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: No
Material specifications	Flammability rating according to UL94 (housing / terminal blocks): V0 Housing material: Metal Hood version: Stainless steel X6Cr17 Side element version: Aluminum
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (>60°C Derating: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Ambient temperature (start-up type tested): -40°C Maximum altitude: Ã¢¤ 5000 m (> 2000 m, observe derating) Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): Ã¢¤ 95 % (at 25°C, non-condensing) Shock: 11ms, 15g, in each space direction (according to IEC 60068-2-27) Vibration (operation): 5Hz ... 100Hz resonance search 0.7g, 90min., resonance frequency 0.7g, 90min. (in accordance with DNV GL Class A)
Standards and regulations	Rail applications: EN50121-3-2 EN50121-5 IEC 62236-3-2 IEC 62236-5 HART FSK Physical Layer Test Specification Compliance: Output voltage U_Out compliant Standard Ã¢ Limitation of mains harmonic currents: EN61000-3-2 Standard - Electrical safety: IEC 61010-2-201(SELV) Standard Ã¢ Safety extra-low voltage: IEC 61010-1 (SELV) IEC 61010-2-201 (PELV) Standard - Safe isolation: IEC 61558-2-16 IEC 61010-2-201 Standard - safety for equipment for measurement, control, and laboratory use: IEC 61010-1 Standard - Safety of transformers: EN61558-2-16 Battery charging: DIN41773-1 Approval - requirement of the semiconductor industry with regard to mains voltage dips: SEMIF47-0706, EN61000-4-11 Overvoltage category EN 61010-1: II(Ã¢¤5000m) EN 62477-1: III(Ã¢¤2000m) EN61558-2-16: II(Ã¢¤4000m)
Approvals	CSA: CAN/CSA-C22.2 No.61010-2-201 CAN/CSA-C22.2 No.107.1-16 Shipbuilding approval: DNV applied for SIQ: CB-Scheme (IEC 61010-1, IEC 61010-2-201) UL approvals: UL Listed UL508 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU EMC requirements, power plant: IEC 61850-3 EN61000-6-5 Conducted noise emission: EN55016 EN61000-6-3 (Class B) Noise emission: Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply) EN55016 EN61000-6-3 (Class B) DNVGL conducted interference: ClassA Additional text: Area power distribution Bridge and deck area DNVGL noise radiation: ClassB Harmonic currents Standards/regulations: EN61000-3-2 EN61000-3-2 (Class A) Frequency range: 0 kHz ... 2 kHz Flicker Standards/regulations: EN61000-3-3 Frequency range: 0 kHz ... 2 kHz Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: 8 kV (Test Level 4) Discharge in air: 15 kV (Test Level 4) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 1 GHz 1 GHz ... 6 GHz Test field strength: 20 V/m (Test Level 3) 10 V/m (Test Level 3) Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: 4 kV (Test Level 4 - asymmetrical) Output: 4 kV (Test Level 4 - asymmetrical) Signal: 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Standards/regulations: EN61000-4-5 Input: typ. 2 kV (Test Level 4 - symmetrical) typ. 4 kV (Test Level 4 - asymmetrical) Output: 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Power frequency magnetic field Standards/regulations: EN61000-4-8 Frequency: 16.7 Hz 50 Hz 60 Hz 50 Hz 60 Hz 0 Hz Test field strength: 100 A/m 1 kA/m 300 A/m Additional text: 60 s 3 s DC, 60s Comments: Criterion A Frequency range: 50 Hz ... 60 Hz Voltage dips Standards/regulations: EN61000-4-11 Voltage: 230 VAC Frequency: 50 Hz Voltage dip: 70 % 40 % 0 % Number of periods: 0.5 / 1 / 25 / 30 periods 5 / 10 / 50 periods 0,5 / 1 / 5 / 50 / 250 periods Additional text: Test Level 2 Comments: Criterion A Criterion A: 0.5 / 1 period Criterion B: 5 / 50 / 250 periods Pulse-shape magnetic field Standards/regulations: EN61000-4-9 Test field strength: 1000 A/m Comments: Criterion A Attenuated sinusoidal oscillations (ring wave) Standards/regulations: EN61000-4-12 Input: 1 kV (Test Level 4 - symmetrical) 2 kV (Test Level 4 - asymmetrical) Comments: Criterion A Asymmetrical conducted disturbance variables Standards/regulations: EN61000-4-16 Test level 1: 15 Hz 150 Hz (Test Level 4) Voltage: 30 V 3 V 3 V 3 V 30 V 30 V 30 V (10s) 30 V (Permanent) 300 V (1 s) Test level 2: 150 Hz 1.5 kHz (Test Level 4) Test level 3: 1.5 kHz 15 kHz (Test Level 4) Test level 4: 15 kHz 150 kHz (Test Level 4) Test level 5: 16.7 Hz 50 Hz 60 Hz (Test Level 4) Test level 6: 150 Hz 180 Hz (Test Level 4) Test level 7: 16.7 Hz 50 Hz 60 Hz (Test Level 4) Comments: Criterion A Attenuated oscillating wave Standards/regulations: EN61000-4-18 Input, output (test level1): 100 kHz 1 MHz (Test Level 3 - symmetrical) Voltage: 1 kV 2.5 kV 1 kV 2.5 kV Input, output (test level2): 10 MHz (Test Level 3 - asymmetrical) Input, output (test level3): 100 kHz 1 MHz (Test Level 3 - asymmetrical) Signals (test level1): 100 kHz 1 MHz (Test Level 3 - symmetrical) Signals (test level2): 100 kHz 1 MHz (Test Level 3 - asymmetrical) Comments: Criterion A Attenuated oscillating magnetic field Standards/regulations: EN61000-4-10 Test field strength: 100 A/m Test level 1: 100 kHz Test level 2: 1 MHz Comments: Criterion A Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. Criterion C: Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.