Industrial Automation
FLT-ISG-100-EX - Spark gap
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | General Note: Connection: screw (DIN 933), M10x25, wrench size: 17 mm, spring washer (DIN 7980), size: 10 |
Product properties | Type: Screw-on module Product type: Spark gap Surge protection fault message: none |
Connection data | Flange Connection method: Connection bolts Screw thread: M10 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/f20df1d7475ac44fa5c8906538ae9a10/-S204x204-FJPG Length: 100 mm +2mm Housing Diameter housing: 45.50 mm |
Material specifications | Material: TPE-S CuZn/galv. Sn Niro A2 FSt/galv. Zn |
Protective circuit | Nominal discharge current In (8/20) µs: 100 kA Lightning surge current Iimp (10/350) üs: 100 kA Alternating voltage response Uaw: ⤠0.5 kV Rated power-frequency withstand voltage UwAC: 250 VAC Rated DC withstand voltage UwDC: 354 VDC Rated impulse sparkover voltage Ur imp: ⤠1.25 kV Rated alternating discharge current: 500 A/0.2 s(at 50/60 Hz, max. discharge current in the event of external voltage influence at the installation location) Response time tA: ⤠100 ns |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 (according to IEC 60529) Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 60°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 95 % (according to DINISO60068-2-30 method 1) |
Approvals | Conformity/Approvals ATEX: ï II 2 G Ex d IIC T6 Gb ï II 2 D Ex tb IIIC T80°C Db IP 66/67 IECEx: Ex d IIC T6 Gb Ex tb IIIC T80°C Db IP66/67 |
Standards and regulations | Standards/specifications: IEC 62561-3 EN62561-3 Note: 2012 |
Mounting | Mounting type: Screw mounting |
ECLASS | ECLASS-11.0: 27140201 ECLASS-13.0: 27170602 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products