Industrial Automation
Notes | General Note: Max. single impulse: 100 kA (8/20 µs) SPD according to AS/NZS1768 Cat. C3 |
Product properties | IEC test classification: I / II T1 / T2 EN type: T1 / T2 IEC power supply system: TN Type: Male Product type: Replacement plug Product family: SEC Family Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
Connection data | Connection method: pluggable |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e547c51b281e854084492e09293e1f8c/-S204x204-FJPG Width: 35.5 mm Height: 113.4 mm Depth: 64.2 mm Horizontal pitch: 2 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6-FR 20% GF PBT-FR Material group: I Housing material: PA 6.6-FR 20% GF PBT-FR |
Protective circuit | Mode of protection: L-PEN Direction of action: L-N / L-PEN Nominal voltage UN: 240VAC (TN) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 264 VAC Nominal discharge current In (8/20) µs: 25 kA Maximum discharge current Imax (8/20) µs: 50 kA Impulse discharge current (10/350)µs, charge: 12.5 As Impulse discharge current (10/350)µs, specific energy: 160 kJ/é Impulse discharge current (10/350)µs, peak value limp: 25 kA Follow current interrupt rating Ifi: 50 kA Short-circuit current rating ISCCR: 50 kA Voltage protection level Up: ⤠1.5 kV Residual voltage Ures: ⤠1.5 kV (at In) ⤠2.5 kV (at 50kA) ⤠1.2 kV (at 12.5kA) ⤠1 kV (at 5 kA) ⤠0.9 kV (at 2.5 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠1.5 kV TOV behavior at UT: 415 VAC (5s / withstand mode) 460 VAC (120min / withstand mode) Response time tA: ⤠100 ns Additional technical data Maximum continuous voltage UC: 275 VAC Short-circuit current rating ISCCR: 100 kA Follow current interrupt rating Ifi: 100 kA |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠4000 m (amsl) Permissible humidity (operation): 5 % ... 95 % |
Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
Mounting | Mounting type: on base element |
ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
ETIM | ETIM 9.0: EC002496 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products