| Product properties | Product type: Limit value switch
Product family: MACX Analog
Type: Signal conditioners with SIL and PL Functional Safety
Configuration: DIP switches
Insulation characteristics: GBStandard
Overvoltage category: II
Pollution degree: 2
|
| System properties | Functionality
Configuration: DIP switches
|
| Electrical properties | Electrical isolation: 3-way isolation
Switching point accuracy: < 0.1 %
Step response (0â99%): ⤠22 ms
Maximum temperature coefficient: 0.01 %/K
Maximum transmission error: 0.1 %
Electrical isolation Output/supply
Rated insulation voltage: 250 VAC (IEC/EN60079-7)
Electrical isolation Input/output/power supply
Rated insulation voltage: 300 VAC (EN61010-1)
Test voltage: 2.5 kV AC (50Hz, 60s)
Insulation: Safe isolation in accordance with IEC/EN61010-1
Electrical isolation Input/output, power supply
Rated insulation voltage: 375 VAC (IEC/EN60079-7)
Supply
Nominal supply voltage: 24 VDC
Supply voltage range: 9.6 VDC ... 30 VDC (12VDC...24VDC (-20%...+25%))
Typical current consumption: 38 mA (24VDC)
Max. current consumption: 90 mA (10VDC)
Power dissipation: < 0.9 W
Power consumption: ⤠1.2 W
|
| Input data | Signal: Voltage/current
Voltage input signal: 0.1 V ... 10 V
0.1 V ... 10.5 V (Maximum range)
Total error of the voltage input maximum: ± 10 mV
Current input signal: 0.2 mA ... 20 mA
0.18 mA ... 21 mA (Maximum range)
Total error of the current input maximum: ± 20 µA
Input resistance of voltage input: > 100 ké
Input resistance current input: < 28 é
Switching threshold "0" signal current: Configurable via DIP switch (in1.25% increments) and potentiometer (linearly up to 2% of the switching threshold set via the DIP switch)
Switching hysteresis: off: approx. 0.5%, on: approx. 1%
Line fault detection: < 0.1 mA (Line break)
> 21.1 mA (Short circuit)
|
| Output data | Switching: Relay
Contact switching type: 1changeover contact
Contact material: AgSnO2, hard gold-plated
Max. switching current: ⤠4 A AC (cos phi = 1)
⤠1 ADC (ohmic load, 24VDC, 50mW)
⤠0.2 ADC (ohmic load, 120VDC)
|
| Connection data | Connection method: Push-in connection
Stripping length: 8 mm
Conductor cross section rigid: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 14
Test socket
Max. diameter: 2 mm
|
| Ex data | Ex installation (EPL): Gc
Div.2
|
| Signaling | Status display: Green LED (supply voltage)
Yellow LED (switching output)
Red LED, flashing (line, sensor error, ERR)
|
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d4485e18fd60154ba93005f91a55c68d/-S204x204-FJPG
Width: 12.5 mm
Height: 116 mm
Depth: 113.7 mm
Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715)
|
| Material specifications | Flammability rating according to UL 94: V0 (Housing)
Housing material: PA 6.6-FR
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20
Ambient temperature (operation): -20°C ... 65°C (Any mounting position)
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ⤠2000 m
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
|
| Approvals | CE
Certificate: CE-compliant
Note: and EN61326
ATEX
Identification: ï II 3G Ex ec nC IIC T4 Gc
Certificate: TÃV 18 ATEX 8222 X
UKCAEx(UKEX)
Identification: ï II 3 G Ex ec nC IIC T4 Gc
Certificate: PxCIF21UKEX2906169X
IECEx
Identification: Ex ec nC IIC T4 Gc
Certificate: IECEx TUR 18.0014X
CCC/China-Ex
Identification: Ex ec nC IIC T4 Gc
Certificate: 2022122304115959
INMETRO
Identification: Ex ec nC IIC T4 Gc
Certificate: DNV 21.0089 X
UL, USA/Canada
Identification: UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate: DNV GL TAA000020C
EAC
Identification: 2Ex e nC IIC T4 Gc X
Certificate: RU C-DE.HB49.B.00145/21
Safety Integrity Level (SIL, IEC 61508)
Identification: 2
Certificate: TÃV Rheinland 968/FSP 1481.00/17
Note: Single-channel
Safety Integrity Level (SIL, IEC 61508)â
Identification: 3
Certificate: TÃV Rheinland 968/FSP 1481.00/17
Note: Two-channel
Systematic Capability
Identification: 3
Performance Level (ISO13849)
Identification: c
DNV GL data
Temperature: B
Humidity: B
Vibration: A
EMC: A
Enclosure: Required protection according to the Rules shall be provided upon installation on board
|
| EMC data | Noise immunity: EN 61000-6-2
Note: When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-4
|
| Standards and regulations | Electrical isolation: 3-way isolation
GBStandard
Standards/regulations: GB3836.1
GB3836.3
GB3836.8
|
| Mounting | Mounting type: DIN rail mounting
|
Not available 
