Not available 
| Product properties | Product type: Voltage transducer Insulation characteristics Pollution degree: 2 |
| Electrical properties | Alignment span: ± 20 % Alignment zero: ± 20 % Electrical isolation: IEC 61010-2-30 (Measuring category II (1000 V)Measuring category III (600 V)Measuring category IV (300 V)) IEC 61010-1 (Overvoltage category III at 300VOvervoltage category IV at 150V) Test voltage: 5.3 kV AC (50Hz, 60s) 2.2 kV AC (50Hz, 60s) Maximum power dissipation for nominal condition: 1.2 W Protective circuit: Surge protection; 33V suppressor diode Step response (10-90%): < 16 ms Maximum temperature coefficient: < 0.015 %/K Maximum transmission error: < 1 % (of measuring range end value) Supply Nominal supply voltage: 24 VDC (-20%...+25%) Supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: < 60 mA |
| Input data | Measurement Configurable/programmable: Yes Input voltage range: -550 VDC ... 550 VDC Input resistance of voltage input: 5500 ké Maximum input voltage: ± 660 VDC Impulse form: DC voltage Measurementâ Input voltage range: -370 VDC ... 370 VDC Input resistance of voltage input: 3700 ké Measurementââ Input voltage range: -250 VDC ... 250 VDC Input resistance of voltage input: 2500 ké Measurementâââ Input voltage range: -170 VDC ... 170 VDC Input resistance of voltage input: 1700 ké Measurementââââ Input voltage range: -120 VDC ... 120 VDC Input resistance of voltage input: 1200 ké Measurementâââââ Input voltage range: -80 VDC ... 80 VDC Input resistance of voltage input: 800 ké Measurementââââââ Input voltage range: -54 VDC ... 54 VDC Input resistance of voltage input: 800 ké Measurementâââââââ Input voltage range: -36 VDC ... 36 VDC Input resistance of voltage input: 800 ké Measurementââââââââ Input voltage range: -24 VDC ... 24 VDC Input resistance of voltage input: 240 ké |
| Output data | Signal: Voltage Voltage output signal: -10 V ... 10 V Max. voltage output signal: ⤠11 V Load/output load voltage output: > 10 ké Ripple: 50 mV Signal: Current Current output signal: -20 mA ... 20 mA Max. current output signal: ⤠22 mA Load/output load current output: < 500 é Max. capacitive load: < 1000 pF Max. inductive load: < 1 mH |
| Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 |
| Dimensions | Width: 22.5 mm Height: 113 mm Depth: 114 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C (non-condensing) Altitude: ⤠2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL 61010 Listed |
| EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
| Standards and regulations | Standards/regulations: IEC 61010-1 IEC 61010-2-030 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: Can be aligned with spacing = 10 mm Mounting position: any |
| ECLASS | ECLASS-11.0: 27210125 ECLASS-13.0: 27210125 ECLASS-12.0: 27210125 |
| ETIM | ETIM 9.0: EC002477 |
| UNSPSC | UNSPSC 21.0: 39121000 |
Description other products
