Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2907054
PHOENIX CONTACTNot available

REL-IR4/24DC/4X21 - Single relay

Plug-in industrial relay with power contacts, 4 changeover contacts, test key, mechanical switch position indicator, polarity: bipolar, input voltage: 24 V DC
Product Code: 2907054
Partner cod.: 2907054
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesProduct type: Single relay
Operating mode: 100% operating factor
Mechanical service life: 1x 107 cycles, approximately
Insulation characteristics
Insulation: Basic insulation
Insulation characteristics​
Insulation: Basic insulation
Overvoltage category: II
Pollution degree: 2
Electrical propertiesMaximum power dissipation for nominal condition: 0.91 W
Test voltage (Winding/contact): 2.5 kVrms (50Hz, 1min., winding/contact)
Test voltage (Changeover contact/changeover contact): 2.5 kVrms (50Hz, 1min., changeover contact/changeover contact)
Rated insulation voltage: 250 VAC
Rated surge voltage: 2.5 kV
Input dataCoil side
Nominal input voltage UN: 24 VDC
Input voltage range: 18.7 VDC ... 46.8 VDC (20°C)
Drive and function: monostable
Drive (polarity): non-polarized
Typical input current at UN: 38 mA
Typical response time: 13 ms
Typical release time: 3 ms
Output dataSwitching
Contact switching type: 4 changeover contacts
Type of switch contact: Single contact
Contact material: AgNi
Maximum switching voltage: 250 V AC/DC
Minimum switching voltage: 5 V (At 24 mA)
Limiting continuous current: 6 A
Maximum inrush current: 16 A (20 ms, N/O contacts)
12 A (4 s, N/O contacts)
Min. switching current: 5 mA (at 24V)
Interrupting rating (ohmic load) max.: 144 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity min.: 0.12 W
Switching capacity: 2 A (at 24 V, DC13)
1 A (at 230 V, AC15)
Connection dataConnection method: Plug-in connection
DimensionsWidth: 21.2 mm
Height: 27.5 mm
Depth: 35.6 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection: RT I
Ambient temperature (operation): -40°C ... 70°C
Ambient temperature (storage/transport): -40°C ... 85°C
ApprovalsCorrosive gas test
Identification: ISA-S71.04. G3 Harsh Group
EN60068-2-60
Standards and regulationsStandards/regulations: IEC 60664
IEC 61810
MountingMounting position: any
Technical Specs
ECLASSECLASS-11.0: 27371601
ECLASS-12.0: 27371601
ECLASS-13.0: 27371601
ETIMETIM 9.0: EC001437
UNSPSCUNSPSC 21.0: 39122300
Description
Plug-in industrial relay with power contacts, 4 changeover contacts, test key, mechanical switch position indicator, polarity: bipolar, input voltage: 24 V DC
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Approvals_00008.pdf

Technical_drawing_40420.pdf