Industrial Automation
ETD-BL-2T-I-230-PT - Timer relay
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Timer relay Operating mode: 100% operating factor Mechanical service life: approx. 2x 107 cycles Insulation characteristics Insulation: Basic insulation Insulation characteristicsâ Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Service life electrical: approx. 2x 105 cycles at ohmic load, 1000 VA Nominal frequency: 48 Hz ... 63 Hz Nominal power consumption: 2.5 VA (1W) Test voltage relay winding/relay contact: 4 kV Rated insulation voltage: 300 V |
Input data | Nominal power consumption: 2.5 VA (1W) Input voltage range: 24 V AC/DC ... 240 V AC/DC -10%...+15% Temperature coefficient, typical: ⤠0.01 %/K Recovery time: 500 ms Function: lp: Switched-mode beginning with the pause li: Switched-mode beginning with the pulse Setting range time: 50 ms ... 100 h (7 time end ranges) Basic accuracy: ± 1 % (of scale end value) Setting accuracy: ⤠5 % (of scale end value) Repeat accuracy: ⤠0.5 % ±5ms Control Connection name: Non-floating, terminals A1-B1 Control pulse length: ⥠50 ms (DC) ⥠100 ms (AC) |
Output data | Switching Contact switching type: 1 floating changeover contact Maximum switching voltage: 250 VAC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max.: 750 VA (3 A/250 V AC, module aligned, ⤠5 mm spacing) 1250 VA (5 A/250 V AC, module not aligned, ⥠5 mm spacing) Output fuse: 5 A (fast-blow) |
Connection data | Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 |
Signaling | Status display: Green LED (POWER) Yellow LED (relay active) |
Dimensions | Width: 17.5 mm Height: 89.5 mm Depth: 65.5 mm |
Material specifications | Flammability rating according to UL 94: V0 |
Environmental and real-life conditions | Ambient conditions Degree of protection (Housing): IP40 (Housing) Degree of protection (Connection terminal blocks): IP20 (Connection terminal blocks) Ambient temperature (operation): -25°C ... 55°C -25°C ... 40°C (corresponds to UL508) Ambient temperature (storage/transport): -25°C ... 70°C Climatic class: 3K3 (in acc. with EN 60721) Permissible humidity (operation): 15 % ... 85 % |
Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
Standards and regulations | Standards/regulations: EN50178 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715 Mounting position: any |
ECLASS | ECLASS-11.0: 27371605 ECLASS-12.0: 27371605 ECLASS-13.0: 27371605 |
ETIM | ETIM 9.0: EC001439 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products