Industrial Automation
QUINT4-CHARGER/1AC/24DC/10 - Battery charger
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Charger Product family: QUINTCHARGER MTBF (IEC 61709, SN 29500): > 500000 h (230 V AC, at 40°C) Insulation characteristics Protection class: I Degree of pollution: 2 |
Electrical properties | Number of phases: 1.00 |
Input data | AC operation Input voltage range: 100 VAC ... 240 VAC -15%...+10% Derating: < 90 VAC (2.5%/V) Frequency range (fN): 50 Hz ... 60 Hz ±10% Current consumption: 2.7 A (100VAC) 1.2 A (240VAC) Input fuse: 6.3 A (internal (device protection), slow-blow) Recommended breaker for input protection: 10 A ... 16 A (AC: Characteristic B, C, D, K, or comparable) DC operation Input voltage range: 110 VDC ... 250 VDC Current consumption: 2.4 A (110VDC) 1.1 A (250VDC) Digital Control (configurable) Designation: Remote / Service |
Output data | Efficiency: 89 % 91 % Nominal output voltage: 24 VDC Setting range of the output voltage (USet): 19.2 VDC ... 28.6 VDC Nominal output current (IN): 10 A Residual ripple: < 20 mVPP Short-circuit-proof: yes No-load proof: yes Output power: 240 W Maximum no-load power dissipation: < 4 W (for 230 V AC) Power loss nominal load max.: < 35 W (for 230 V AC) Connection in parallel: no Connection in series: No Signal: U Output voltage: 24 VDC Continuous load current: 20 mA Signal ground SGnd: Reference ground signal contacts Signal: Bat.-Voltage OK Output voltage: 24 VDC Continuous load current: 20 mA Signal ground SGnd: Reference ground signal contacts Signal: Alarm Output voltage: 24 VDC Continuous load current: 20 mA Signal ground SGnd: Reference ground signal contacts |
Energy storage | Nominal voltage UN: 24 VDC Charging voltage: max. 32 VDC Charging current: typ. 10 A Nominal capacity range: 7 Ah ... 300 Ah Battery technology: VRLA, VRLA-WTR, LI-ION (LiFePO4) Charge characteristic curve: IU |
Connection data | Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 2.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 6.5 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 2.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 6.5 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Connection method: Push-in connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 1.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 1.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 1.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 1.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 16 Stripping length: 8 mm |
Interfaces | Interface: MINI-USB type B |
Signaling | Signal output: Transistor output, active Signalization designation: UIn OK Status display: Green LED Signal output: Transistor output, activeâ Signalization designation: Bat.-Voltage OK Status display: Green LED Signal output: Transistor output, activeââ Signalization designation: Alarm Status display: LED red Signal output Signalization designation: Reference potential for the signal inputs and outputs |
Dimensions | Width: 60 mm Height: 130 mm Depth: 126 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 50 mm / 50 mm Alternative assembly Width: 123 mm Height: 130 mm Depth: 63 mm |
Material specifications | Housing material: Metal Hood version: High-grade steel plate Side element version: Aluminum |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C (>60°C Derating: 2,5 %/K) Ambient temperature (storage/transport): -40°C ... 85°C Maximum altitude: ⤠4000 m (> 2000 m, observe derating) Climatic class: 3K3 (EN60721) Max. permissible relative humidity (operation): ⤠95 % (At +25°C, non-condensing) Shock: 30g, 18ms in accordance with IEC 60068-2-27 Vibration (operation): 2Hz ... 15Hz, ±2.5mm amplitude; 15Hz ... 150Hz, 2.3g |
Approvals | UL approvals: UL Listed UL61010-1 UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C UL Identification: UL Listed UL61010 |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC Interference emission: Interference emission in accordance with EN61000-6-3 (residential and commercial) and EN61000-6-4 (industrial) Noise immunity: Immunity in accordance with EN 61000-6-2 (industrial) Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Conducted noise emission: EN61000-6-3 (Class B) Noise emission: EN61000-6-3 (Class B) Harmonic currents Frequency range: 0 kHz ... 2 kHz Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: 6 kV (Test Level 3) Discharge in air: 8 kV (Test Level 3) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 1 GHz Test field strength: 10 V/m (Test Level 3) Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 2 kV (Test Level 3 - asymmetrical) Output: 1 kV (Test Level 2 - asymmetrical) Signal: 1 kV (Test Level 2 - asymmetrical) Comments: Criterion B Surge voltage load (surge) Standards/regulations: EN61000-4-5 Input: 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output: 1 kV (Test Level 1 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 1 kV (Test Level 2 - asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and regulations | Standard â Safety extra-low voltage: IEC 61010 (SELV) / (PELV) Standard - Safe isolation: DINVDE0100-410 Standard - safety for equipment for measurement, control, and laboratory use: IEC 61010-1 Overvoltage category EN 61010-1: II |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 21052901 ECLASS-12.0: 21052901 ECLASS-13.0: 21052901 |
ETIM | ETIM 9.0: EC001184 |
UNSPSC | UNSPSC 21.0: 26111700 |
Description other products