Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2908046
PHOENIX CONTACT 2908046
PHOENIX CONTACTNot available

REL-PR1-220DC/1/MB - Single relay

Plug-in high-power relay with power contacts, specifically for switching high DC loads, 1 N/O contact, blowout magnet, coil voltage: 220 V DC
Product Code: 2908046
Partner cod.: 2908046
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Single relay
Operating mode: 100% operating factor
Mechanical service life: approx. 2x 107 cycles
Insulation characteristics
Overvoltage category: III
Pollution degree: 3
Electrical propertiesService life electrical: see diagram
Maximum power dissipation for nominal condition: 1.61 W
Test voltage (Winding/contact): 2.5 kV (50Hz, 1min., winding/contact)
Rated surge voltage: 4 kV
Input dataCoil side
Nominal input voltage UN: 220 VDC
Input voltage range: 187 VDC ... 242 VDC
Input voltage range in reference to UN: see diagram
Drive and function: monostable
Drive (polarity): non-polarized
Typical input current at UN: 7.3 mA
Typical response time: 20 ms
Typical release time: 15 ms
Output dataSwitching
Contact switching type: 1 N/O contact
Type of switch contact: Single contact
Contact material: AgNi
Maximum switching voltage: 440 VAC
250 VDC
Minimum switching voltage: 5 V (At 24 mA)
Limiting continuous current: 16 A
Maximum inrush current: 50 A (20ms)
30 A (4 s)
Min. switching current: 5 mA (at 24V)
Interrupting rating (ohmic load) max.: 384 W (at 24 V DC)
744 W (at 48 V DC)
900 W (at 60 V DC)
1540 W (at 110 V DC)
2640 W (at 220 V DC)
4000 VA (for 250 V AC)
Switching capacity min.: 120 mW
Switching capacity: 1 A (220V, DC13)
1.5 A (240V, AC15)
16 A (24VDC, L/R = 40ms)
12 A (48VDC, L/R = 40ms)
9.5 A (60VDC, L/R = 40ms)
5.4 A (110VDC, L/R = 40ms)
3 A (220VDC, L/R = 40ms)
2.7 A (250VDC, L/R = 40ms)
Connection dataConnection method: Plug-in connection
DimensionsWidth: 38.6 mm
Height: 36.1 mm
Depth: 45.5 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection: RT I
Ambient temperature (operation): -40°C ... 70°C
Ambient temperature (storage/transport): -40°C ... 85°C
ApprovalsCorrosive gas test
Identification: ISA-S71.04. G3 Harsh Group
EN60068-2-60
Standards and regulationsStandards/regulations: IEC 60664
IEC 61810
MountingMounting position: any
Technical Specs
ECLASSECLASS-11.0: 27371601
ECLASS-12.0: 27371601
ECLASS-13.0: 27371601
ETIMETIM 9.0: EC001437
UNSPSCUNSPSC 21.0: 39122300
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Approvals_00008.pdf

Manufacturer_declaration_03695.pdf

Manufacturer_declaration_04847.pdf

Product_information_00033.pdf

Product_information_00716.pdf

Technical_drawing_40572.pdf