2908065 PHOENIX CONTACT - Technology Bsa

Product properties	Product type: Output signal conditioner Product family: MACX Analog No. of channels: 2 Type: Signal conditioners with SIL functional safety
Electrical properties	No. of channels: 2 Electrical isolation: 4-way isolation Signal transmission behavior: In=Out Step response (10-90%): < 140 µs (for 4 mA ... 20 mA step) Maximum temperature coefficient: 0.01 %/K Temperature coefficient, typical: Ã¢¤ 0.005 %/K Maximum transmission error: 0.1 % (of final value) Transmission error, typical: Ã¢¤ 0.05 % (of final value) Electrical isolationÃ¢ Overvoltage category: II Pollution degree: 2 Electrical isolation Input/output IEC/EN61010-1 Standards/regulations: IEC/EN61010-1 Rated insulation voltage: 300 V_rms Test voltage: 2.5 kV AC (50Hz, 60s) Insulation: Safe isolation Electrical isolation Input/power supply IEC/EN61010-1 Standards/regulations: IEC/EN61010-1 Rated insulation voltage: 50 V_rms Test voltage: 1.5 kV AC (50Hz, 60s) Insulation: Basic insulation Electrical isolation Output/supply IEC/EN61010-1 Standards/regulations: IEC/EN61010-1 Rated insulation voltage: 300 V_rms Test voltage: 2.5 kV AC (50Hz, 60s) Insulation: Safe isolation Electrical isolation Input1/input2, output1/output2 Test voltage: 1.5 kV AC (50Hz, 60s) Supply Nominal supply voltage: 24 VDC -20%...+25% Supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: < 85 mA (24VDC / 20mA) Power dissipation: < 1.4 W (24VDC / 20mA) Power consumption: Ã¢¤ 2 W (24VDC / 20mA)
Input data	Signal: Current Current input signal: 0.2 mA ... 20 mA (Function) 4 mA ... 20 mA (Safety) 0 mA ... 24 mA (Underload/overload range) Input current: Ã¢¤ 30 mA Input impedance: > 1 MÃ© (If there is a line fault) Line fault detection: > 0.2 mA (Response threshold of input current) Voltage drop: < 2.4 V (at 20 mA)
Output data	Signal: Current Number of outputs: 2 Current output signal: 0.2 mA ... 20 mA (Function) 4 mA ... 20 mA (Safety) 0 mA ... 24 mA (Underload/overload range) Load: 100 Ã© ... 700 Ã© (20mA) 100 Ã© ... 650 Ã© (20.5mA) 100 Ã© ... 500 Ã© (24mA) Output ripple: < 20 mV_rms Non-load voltage: Ã¢¤ 27 V Line fault detection: > 10 kÃ© (Line break) < 50 Ã© (Short circuit)
Connection data	Connection method: Screw connection Stripping length: 7 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm COMBICON connection Max. diameter: 2 mm
Ex data	Ex installation (EPL): Gc Div.2
Interfaces	Data communication (bypass) HART function: Yes Protocols supported: HART-transparent
Signaling	Status display: Green LED (supply voltage)
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3edd36290ae8094db8e0add7aa964a6f/-S204x204-FJPG Width: 12.5 mm Height: 112.5 mm Depth: 113.7 mm Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715)
Material specifications	Flammability rating according to UL 94: V0 (Housing) Housing material: PA 6.6-FR
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C (Any mounting position) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Altitude range (Ã¢¤ 2000 m (Ex)) Description: Ex applications Altitude: Ã¢¤ 2000 m (The technical data refers to altitudes Ã¢¤2000m above mean sea level. For altitudes >2000m above mean sea level, refer to the data sheet.) Ambient temperature (operation): -40°C ... 70°C Rated insulation voltage: 320 V (Power supply, input / output) Altitude range (Ã¢¤ 3000 m (Ex)) Description: Ex applications Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40°C ... 60°C Rated insulation voltage: 190 V (Power supply, input / output) Altitude range (Ã¢¤ 4000 m (Ex)) Description: Ex applications Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40°C ... 55°C Rated insulation voltage: 63 V (Power supply, input / output) Altitude range (Ã¢¤ 5000 m (Ex)) Description: Ex applications Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40°C ... 45°C Rated insulation voltage: 63 V (Power supply, input / output) Altitude range (Ã¢¤ 2000 m) Description: Non-Ex applications (EN61010-1) Altitude: Ã¢¤ 2000 m (The technical data refers to altitudes Ã¢¤2000m above mean sea level. For altitudes >2000m above mean sea level, refer to the data sheet.) Ambient temperature (operation): -40°C ... 70°C Rated insulation voltage: 300 V (Power supply, input / output) Altitude range (Ã¢¤ 3000 m) Description: Non-Ex applications (EN61010-1) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40°C ... 60°C Rated insulation voltage: 150 V (Power supply, input / output) Altitude range (Ã¢¤ 4000 m) Description: Non-Ex applications (EN61010-1) Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40°C ... 55°C Rated insulation voltage: 150 V (Power supply, input / output) Altitude range (Ã¢¤ 5000 m) Description: Non-Ex applications (EN61010-1) Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40°C ... 45°C Rated insulation voltage: 150 V (Power supply, input / output)
Approvals	CE Certificate: CE-compliant Note: and EN61326 ATEX Identification: Ã¯ II 3 G Ex ec IIC T4 Gc Certificate: BVS 20 ATEX E 003 X UKCAEx(UKEX) Identification: Ã¯ II 3 G Ex ec IIC T4 Gc Certificate: PxCIF21UKEx2908065X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx BVS 20.0003X CCC/China-Ex Identification: Ex ec IIC T4 Gc Certificate: 2021122304114079 UL, USA/Canada Identification: UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC T4 Shipbuilding approval Certificate: DNV GL TAA00000AG Safety Integrity Level (SIL, IEC 61508) Identification: 3 Systematic Capability Identification: 3 INMETRO Identification: Ex ec IIC T4 Gc Certificate: DNV 21.0092 X EAC Identification: 2Ex e IIC T4 Gc X Certificate: RU C-DE.HB49.B.00145/21 DNV GL data Temperature: B Humidity: B Vibration: A EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC data	Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4
Standards and regulations	Electrical isolation: 4-way isolation GBStandard Standards/regulations: GB/T3836.1 GB/T3836.3
Mounting	Mounting type: DIN rail mounting