Not available 
| Product properties | Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Input function Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Standards/regulations Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Maximum power dissipation for nominal condition: 0.81 W Test voltage (Input/output): 2.5 kV (50Hz, 1min., input/output) |
| Input data | Nominal input voltage UN: 230 VAC 220 VDC Input voltage range in reference to UN: 0.8 ... 1.1 Input voltage range: 184 VAC ... 253 VAC 176 VDC ... 242 VDC Switching threshold "0" signal in reference to UN: ⤠0.3 Switching threshold "1" signal in reference to UN: ⥠0.8 Typical input current at UN: 3.5 mA Typical response time: 3 ms (at UN) Typical turn-off time: 5 ms (at UN) Operating voltage display: Yellow LED Protective circuit: Bridge rectifier Transmission frequency: 10 Hz |
| Output data | Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 5 VDC ... 30 VDC Limiting continuous current: 3 mA Surge voltage protection: > 56 V Voltage drop at max. limiting continuous current: ⤠1 V Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection; Polarity protection diode Surge protection |
| Connection data | Input side Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Output side Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 |
| Dimensions | Width: 6.2 mm Height: 80 mm Depth: 94 mm |
| Material specifications | Flammability rating according to UL 94: V0 (Housing) |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -25°C ... 70°C |
| Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
| Standards and regulations | Standards/regulations Standards/regulations: IEC 60947-5-1 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
| ECLASS | ECLASS-11.0: 27371604 ECLASS-12.0: 27371604 ECLASS-13.0: 27371604 |
| ETIM | ETIM 9.0: EC001504 |
| UNSPSC | UNSPSC 21.0: 39122300 |
Description other products
