Not available 
| Input data | Input voltage range: 22.5 VDC ... 30 VDC Fixed backup threshold: < 22 VDC Voltage type of supply voltage: DC Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max): 46 A (max.) Current consumption INo-Load(UN, IOUT = 0, Icharge = 0): 0.2 A (No-load) Current consumption Icharge (UN, IOUT = 0, Icharge = max): 0.8 A (charging process) Buffer time: 0.2 s (40A) 2 s (4A) |
| Output data | Efficiency: > 98 % (with charged energy storage device) Connection in parallel: no Connection in series: No Mains operation Output voltage: 24 VDC (depending on the input voltage) Output current IN: 40 A Static Boost (IStat.Boost): 45 A (15ms) Dynamic Boost (IDyn.Boost): 60 A (5 s) Power loss nominal load max.: < 9 W Buffer mode Output voltage: typ. 22 VDC Output current IN: 40 A (depending on output current) Static Boost (IStat.Boost): 45 A Signal state Ready Connection labeling: 3.3 Switching output: Transistor output, active State (configurable): Ready State condition (configurable): State of charge = 100% or buffer mode Output voltage: 24 V (UN - 2V (typical)) Output can be loaded: 20 mA Signal state UIN OK Connection labeling: 3.1, 3.2 Switching output: Electronic relays (OptoMOS) State (configurable): UIn OK Output voltage: 30 VDC Output can be loaded: 200 mA LED status indicator: green (UIn OK) Signal threshold: Input voltage in the valid range Signal ground SGnd Connection labeling: 3.4 Function: Signal ground Reference potential: 3.3Ready |
| Energy storage | Input Nominal capacity: 2 mAh General IQ-Technology: no |
| Electrical properties | Insulation voltage input, output / housing: 500 V |
| Product properties | Product type: Buffer module Product family: QUINT BUFFER MTBF (IEC 61709, SN 29500): 2813895 h (40°C) Insulation characteristics Protection class: Special application (SELV input voltage, hazardous voltages are generated in the device). Overvoltage category: I Degree of pollution: 2 Life expectancy (electrolytic capacitors) Time: 71660 h |
| Dimensions | Item dimensions Width: 72 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 50 mm / 50 mm |
| Mounting | Assembly instructions: alignable: horizontally 0mm, vertically 50mm Mounting position: horizontal DIN rail NS 35, EN 60715 |
| Material specifications | Housing material: Metal |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (> 40°C Derating: 0.56%/K / > 60°C Derating: 2.5%/K) Ambient temperature (storage/transport): -40°C ... 70°C Ambient temperature (start-up type tested): -40°C Maximum altitude: ⤠4000 m Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): ⤠95 % |
| Standards and regulations | Electrical safety Standard designation: Electrical safety Standards/specifications: IEC 60950-1/VDE0805(SELV) |
| Approvals | UL Identification: UL Listed UL508 ULâ Identification: UL/C-UL Recognized UL60950-1 |
| EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN55016 EN61000-6-3 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: 6 kV (Test Level 3) Discharge in air: 8 kV (Test Level 3) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 6 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 2 kV (Test Level 3 - asymmetrical) Output: 2 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 3 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Input: 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Output: 1 kV (Test Level 2 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 1 kV (Test Level 2 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
| ECLASS | ECLASS-11.0: 27040692 ECLASS-12.0: 27040692 ECLASS-13.0: 27040692 |
| ETIM | ETIM 9.0: EC002850 |
| UNSPSC | UNSPSC 21.0: 26111700 |
Description other products
