2908672 PHOENIX CONTACT - Technology Bsa

ELR H3-IES-PT/500AC-9-IOL - Hybrid motor starter

Networkable hybrid motor starter for starting 3~AC motors up to 500VAC and 9A output current, with adjustable overload shutdown, emergency stop function up to SIL3/PLe, and Push-in connection. Connection to IO-Link.

Product Code: 2908672

Partner cod.: 2908672

PHOENIX CONTACT

Notes	General: If this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter to the power distribution board.
Product properties	Product type: Hybrid motor starters Product family: CONTACTRON Operating mode: 100% operating factor
Electrical properties	Number of phases: 3 Motor starter type: Direct starter Switching frequency: Ã¢¤ 2 Hz (Load-dependent) Maximum power dissipation: 7 W Minimum power dissipation: 0.88 W Coordination type: 1 Supply Rated control circuit supply voltage U_S: 24 VDC Control supply voltage range: 19.2 VDC ... 30 VDC Rated control supply current I_S: 65 mA Protective circuit: Surge protection Reverse polarity protection; Parallel polarity protection diode Supply: IO-Link Nominal voltage for I/O supply: 24 VDC (This supply voltage is provided via the IO-Link interface of the IO-Link master.) Current consumption: typ. 65 mA ±15% (24VDC) max. 150 mA Protective circuit: Reverse polarity protection Short-circuit protection Overload protection Insulation characteristics Rated insulation voltage: 550 V Rated surge voltage: 6 kV Overvoltage category: III Degree of pollution: 2 Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit: Safe isolation (IEC 60947-1) Isolation characteristics between the control input and control supply voltage to auxiliary circuit: Safe isolation (IEC 60947-1) in the auxiliary circuit Ã¢¤ 300 V AC Safe isolation (EN 50178) in the auxiliary circuit Ã¢¤ 300 V AC Emergency tripping Operate threshold: > 60 A Response time: < 0.5 s
Input data	Control Input name: Enable input Rated actuating voltage U_C: 24 VDC Triggering voltage range: 19.2 VDC ... 30 VDC Rated actuating current I_C: 7 mA Switching threshold: 9.6 V (Ã¢0Ã¢ signal) 19.2 V (Ã¢1Ã¢ signal) Switching level: < 5 VDC (For EMERGENCY STOP) Typical turn-off time: < 30 ms IO-Link Number of ports: 1 Connection method: COMBICON Connection technology: 3-conductor Specification: V1.1.1 Reverse polarity protection: yes Cycle Time: 30 ms Amount of process data: 8 Byte (Input data) 2 Byte (Output data)
Output data	AC output Rated operating voltage U_e: 500 VAC Operating voltage range: 42 VAC ... 550 VAC Rated operating current I_e: 9 A (AC-51) 7 A (AC-53a) Mains frequency: 50/60 Hz Load current range: 1.5 A ... 9 A (see to derating) Trigger characteristic in acc. with IEC 60947-4-2: Class 10A Cooling time: 20 min. (for auto reset) Leakage current: 0 mA Protective circuit: Surge protection; Varistor
Connection data	Control circuits Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Load circuit Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14
Signaling	Status display: Yellow LED Operating voltage display: Green LED Error indication: Red LED
Dimensions	Width: 22.5 mm Height: 127 mm Depth: 114 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -5°C ... 55°C (observe derating) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m
Approvals	UKCA Certificate: UKCA-compliant UL approval Certificate: NLDX.E228652 NRNT.E172140 Safety Integrity Level (SIL, IEC 61508) Identification: Ã¢¤3 Note: Safe shutdown Performance Level (ISO13849) Identification: e Note: Safe shutdown Category (ISO13849) Identification: Ã¢¤3 Note: Safe shutdown UL data SCCR: 100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault))) 5 kA (480 V AC (fuse: 20 A RK5 (standard fault))) FLA: 7.6 A (480VAC) Group installation: 20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded) 30 A (class CC or J, SCCR 100kA (480 V AC), #24 - 14 AWG max, solid and stranded) Category code: NLDX / NRNT Horsepower ratings: 2 hp (208VAC) 2 hp (230 V AC) 2 hp (240VAC) 5 hp (480VAC)
Standards and regulations	Standards/regulations Standards/regulations: IEC 60947-1 EN60947-4-2 IEC 61508 ISO13849
Mounting	Mounting type: DIN rail mounting Assembly instructions: alignable, for spacing see derating Mounting position: vertical (horizontal DIN rail, motor output below)