2909557 PHOENIX CONTACT - Technology Bsa

Tecnichal data

Product properties	Product type: Hybrid motor starters Product family: CONTACTRON Operating mode: 100% operating factor
Electrical properties	Number of phases: 3 Motor starter type: Direct starter Switching frequency: Ã¢¤ 2 Hz (Load-dependent) Maximum power dissipation: 4.1 W Minimum power dissipation: 0.88 W Coordination type: 1 Supply Rated control circuit supply voltage U_S: 24 VDC Control supply voltage range: 19.2 VDC ... 30 VDC Rated control supply current I_S: 60 mA Protective circuit: Surge protection Reverse polarity protection; Parallel polarity protection diode Insulation characteristics Rated insulation voltage: 550 V Rated surge voltage: 6 kV Overvoltage category: III Degree of pollution: 2 Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit: Safe isolation (IEC 60947-1) Isolation characteristics between the control input and control supply voltage to auxiliary circuit: Safe isolation (IEC 60947-1) in the auxiliary circuit Ã¢¤ 300 V AC Emergency tripping Operate threshold: > 33 A Response time: < 0.5 s
Input data	Control Input name: Control input and enable input Note: The enable input is compatible with signals with blanking (semiconductor output signals with test pulse with max. 3ms duration), unblanking pulses of max. 4ms are tolerated without adversely affecting the safety function. Rated actuating voltage U_C: 24 VDC Triggering voltage range: 19.2 VDC ... 30 VDC Rated actuating current I_C: 7 mA Switching threshold: 9.6 V (Ã¢0Ã¢ signal) 19.2 V (Ã¢1Ã¢ signal) Switching level: < 5 VDC (For EMERGENCY STOP) Typical turn-off time: < 30 ms Protective circuit: Reverse polarity protection
Output data	AC output Rated operating voltage U_e: 500 VAC Operating voltage range: 42 VAC ... 550 VAC Rated operating current I_e: 3 A (AC-51) 3 A (AC-53a) Mains frequency: 50/60 Hz Load current range: 180 mA ... 3 A Trigger characteristic in acc. with IEC 60947-4-2: Class 10 Cooling time: 20 min. (for auto reset) Leakage current: 0 mA Protective circuit: Surge protection; Varistor Acknowledge output Note: Confirmation: floating change-over contact, signal contact Contact switching type: 1changeover contact Switching capacity in accordance with IEC 60947-5-1: 2 A (24V, DC13)
Connection data	Control circuits Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Load circuit Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14
Signaling	Status display: Yellow LED Operating voltage display: Green LED Error indication: Red LED
Dimensions	Width: 22.5 mm Height: 107.5 mm Depth: 114 mm
Material specifications	Flammability rating according to UL 94: V0 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (observe derating) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m
Approvals	UKCA Certificate: UKCA-compliant ATEX Identification: Ã¯ I I (2) G [Ex db] [Ex eb] [Ex pxb] Ã¯ II (2) D [Ex tb] [Ex pb] Certificate: PTB 18 ATEX 3004 UL approval Certificate: NLDX.E228652 NRNT.E172140 Safety Integrity Level (SIL, IEC 61508) Identification: Ã¢¤3 Note: Safe shutdown Safety Integrity Level (SIL, IEC 61508)Ã¢ Identification: 2 Note: Motor protection Performance Level (ISO13849) Identification: Ã¢¤e Note: Safe shutdown Category (ISO13849) Identification: Ã¢¤3 Note: Safe shutdown UL data SCCR: 100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault))) 5 kA (480 V AC (fuse: 20 A RK5 (standard fault))) FLA: 3 A (480VAC) Group installation: 20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded) 30 A (class CC or J, SCCR 100kA (480 V AC), #24 - 14 AWG max, solid and stranded) Category code: NLDX / NRNT Horsepower ratings: 0.5 hp (208VAC) 0.5 hp (230 V AC) 0.5 hp (240VAC) 1.5 hp (480VAC) Ambient temperature (operation): -25°C ... 55°C
Standards and regulations	Standards/regulations Standards/regulations: EN60947-1 EN60947-4-2 EN50495 ENISO13849 IEC 62061 IEC 61508
Mounting	Mounting type: DIN rail mounting Assembly instructions: alignable, for spacing see derating Mounting position: vertical (horizontal DIN rail, motor output below)

Technical Specs

ECLASS	ECLASS-11.0: 27370905 ECLASS-12.0: 27370905 ECLASS-13.0: 27370905
ETIM	ETIM 9.0: EC001037
UNSPSC	UNSPSC 21.0: 25173900

Description

Hybrid motor starter as an alternative to a conventional contactor circuit. Starts 3~ AC motors up to 3 A, offers motor protection, ATEX, and emergency stop up to SIL 3. Possible group shut-down, supply, and relay extension via DIN rail connector.

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00183.pdf

Application_note_00065.pdf

Application_note_00076.pdf

Approvals_00051.pdf

Approvals_00052.pdf

Approvals_01411.pdf

Approvals_01912.pdf

Data_sheet_03926.pdf

Manufacturer_declaration_01109.pdf

Manufacturer_declaration_02015.pdf

Manufacturer_declaration_03222.pdf

Manufacturer_declaration_16418.pdf

Package_slip_00947.pdf

Technical_drawing_40783.pdf