2963996 PHOENIX CONTACT - Technology Bsa

PSR-SPP-24UC/ESAM4/8X1/1X2 - Safety relays

Safety relay for emergency stop and safety door monitoring up to SIL3 or Cat.4, PLe in accordance with ENISO13849, single- or two-channel operation, 8enabling current paths, U_S=24VDC, pluggable Push-in terminal block

Product Code: 2963996

Partner cod.: 2963996

PHOENIX CONTACT

Product properties	Product type: Safety relays Product family: PSRclassic Application: Emergency stop Safety door Mechanical service life: approx. 10⁷ cycles Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/EN61810-3
Electrical properties	Maximum power dissipation for nominal condition: 31.7 W (U_S=26.4V, I_L²=144A², P_Totalmax=2.9W+28.8W) Nominal operating mode: 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 V Rated surge voltage/insulation: Basic insulation 4kV: between all current paths and housing Safe isolation, reinforced insulation 6kV: between A1/A2 and 63/64, 73/74, 83/84 between S10/S11/S12/S33/S34/S35 and 63/64, 73/74, 83/84 between 63/64, 73/74, 83/84 among one another
Input data	General Rated control circuit supply voltage U_S: 24 VDC -15% / +10% Power consumption at U_S: typ. 2.4 W (DC) Rated control supply current I_S: typ. 100 mA DC (at U_S) Inrush current: 3.5 A (Ãt=2ms at U_s) max. 150 mA (Ãt=1ms, with U_s/I_x at S10) max. 200 mA (Ãt=1ms, with U_s/I_x at S12) max. -180 mA (Ãt=1ms, with U_s/I_x at S22) < 10 mA (with U_s/I_xto S34) < 10 mA (with U_s/I_xto S35) Current consumption: 50 mA (with U_s/I_xto S10) 50 mA (with U_s/I_xto S12) -50 mA (with U_s/I_xto S22) 0 mA (with U_s/I_xto S34) 1 mA (with U_s/I_xto S35) Voltage at input/start and feedback circuit: 24 VDC -15% / +10% Filter time: 2 ms (at A1 in the event of voltage dips at U_s) max. 1.5 ms (at S10, S12; test pulse width) 7.5 ms (at S10, S12; test pulse rate) Test pulse rate=5xTest pulse width Typical response time: < 120 ms (automatic start) < 140 ms (manual start) Typ. starting time with U_s: < 200 ms (when controlled via A1) Typical release time: < 20 ms (when controlled via S11/S12 and S21/S22) < 50 ms (when controlled via A1) Concurrence: Ã¢ Recovery time: < 500 ms (following demand of the safety function) < 1 s (Boot time) Maximum switching frequency: 0.5 Hz Protective circuit: Surge protection; Suppressor diode Max. permissible overall conductor resistance: 11 Ã© (Input sensor circuit S10,S12,S22) 50 Ã© (S34,S35 start circuit input) Operating voltage display: 1 x green LED Status display: 2 x green LEDs
Output data	Contact switching type: 8 enabling current paths 1 signaling current path Contact material: AgSnO₂ Maximum switching voltage: 250 VAC Minimum switching voltage: 5 V AC/DC Limiting continuous current: 6 A Maximum inrush current: 6 A Inrush current, minimum: 10 mA Sq. Total current: 144 A² (Enabling current paths) 36 A² (Signaling current path) Switching capacity min.: 50 mW Switching capacity in accordance with IEC 60947-5-1: 5 A (DC13) 3 A (AC15) 0.5 A (AC15) Output fuse: 10 A gL/gG (Enabling current paths) 6 A gL/gG (Signaling current path)
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) Conductor cross-section AWG: 24 ... 16 Stripping length: 8 mm
Dimensions	Width: 45 mm Height: 112 mm Depth: 114.5 mm
Material specifications	Housing material: Polyamide
Characteristics	Safety data Stop category: 0 Safety data: ENISO13849 Category: 4 Performance level (PL): e (3ADC13; 3AAC15; 8760switching cycles/year) Safety data: IEC 61508 - High demand Safety Integrity Level (SIL): 3 Safety data: IEC 61508 - Low demand Safety Integrity Level (SIL): 3 Safety data: ENIEC 62061 Safety Integrity Level (SIL): 3
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -20°C ... 55°C (observe derating) Ambient temperature (storage/transport): -40°C ... 70°C Maximum altitude: Ã¢¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing) Shock: 15g Vibration (operation): 10Hz...150Hz, 2g
Approvals	CE Certificate: CE-compliant
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: DINEN60947-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: See derating curve Mounting position: vertical or horizontal Connection method: Push-in connection