2969055 PHOENIX CONTACT - Technology Bsa

UMK-32 RM/MR-G24/1/YCS - Active module

32-channel output relay module (one N/O contact, 250 V AC/3 A) with a screw connection. The module is controlled through a 50-pos. system connector and is suitable for the Yokogawa ADV 551 and ADV 561 cards.

Product Code: 2969055

Partner cod.: 2969055

PHOENIX CONTACT

Product properties	Product type: Interface module No. of channels: 32 Compatible components: Miniature relay, REL-MR-G 24/1 With components: yes Insulation characteristics Overvoltage category: II Pollution degree: 2
Electrical properties	No. of channels: 32 Rated insulation voltage: 300 VAC Rated surge voltage: 4 kV (Basic insulation) Supported controller YOKOGAWA CS3000 CentumVP Suitable I/O card: ADV551 ADV561 Supported controller YOKOGAWA STARDOM Suitable I/O card: NFDV551 NFDV561
Input data	Nominal input voltage U_N: 24 VDC Input voltage range in reference to U_N: 0.9 ... 1.1 Input voltage range: 21.6 VDC ... 26.4 VDC Typical input current at U_N: 6.5 mA (per channel) Protective circuit: Free running; Freewheeling diode Reverse polarity protection; Polarity protection diode Operating voltage display: Green LED Status display/channel: Yellow LED
Output data	Compatible components: Miniature relay, REL-MR-G 24/1 Switching Contact switching type: 1 N/O contact Maximum switching voltage: 250 VAC 125 VDC Minimum switching voltage: 5 V AC/DC Limiting continuous current: 3 A Maximum inrush current: 2 A (Supply, (P1+, P2+), pluggable fuse (IEC 127-2, 5X20, 2A)) Min. switching current: 1 mA Interrupting rating (ohmic load) max.: 72 W (at 24 V DC) 60 W (at 48 V DC) 50 W (at 60 V DC) 50 W (at 110 V DC) 750 VA (for 250 V AC) Error detection (line break / short-circuit): no
Connection data	Field level Connection method: Screw connection Number of connections: 72 Number of positions: 3 Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 26 ... 14 Controller level Connection method: Yokogawa KS-compatible Number of connections: 1 Number of positions: 50 Note: Usable system cables: Phoenix Contact YUC50, Yokogawa AKB331 Tightening torque: 0.5 Nm
Signaling	Status display present: Yes
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d30ef06a5aa586448e5dcf7d3fc69086/-S204x204-FJPG Width: 202.5 mm Height: 77 mm Depth: 61 mm
Material specifications	Housing insulation material: PVC, side panel PA non-reinforced,
Environmental and real-life conditions	Ambient conditions Degree of protection: IP00 Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C
Standards and regulations	Standards/regulations: EN61010-2-201 IEC 60664
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any
Notes	General: Observe the maximum switching capacity of the relays used Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch. The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e.g., partition plates). For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.