Industrial Automation
Product properties | Product type: Safety relays Product family: PSRclassic Application: Emergency stop Process technology Safety door Mechanical service life: approx. 107 cycles Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/EN61810-3 |
Electrical properties | Maximum power dissipation for nominal condition: 15.9 W (I²=72A²) Nominal operating mode: 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 V Rated surge voltage/insulation: 6 kV / Safe isolation, increased insulation Basic insulation 4 kV between all current paths and housing |
Input data | General Rated control circuit supply voltage US: 24 VDC -15% / +10% Power consumption at US: 1.2 W Rated control supply current IS: typ. 50 mA DC Inrush current: 1 A (Ãt<10msat Us) Filter time: max. 3 ms (Test pulse duration) Typical response time: 60 ms (Automatic/manual start) Typical release time: 20 ms Recovery time: approx. 1 s Protective circuit: Surge protection; Suppressor diode, 33 V (A1 - A2, Y2 - A2) Reverse polarity protection Operating voltage display: Green LED Status display: Green LED |
Output data | Contact switching type: 2 enabling current paths 1 signaling current path Contact material: AgSnO2, gold-flashed Maximum switching voltage: 250 V AC/DC (Observe the load curve) Minimum switching voltage: 10 V Limiting continuous current: 6 A (N/O contact/N/C contact, high demand) 4 A (N/O contact, for low-demand applications) Maximum inrush current: 6 A Inrush current, minimum: 10 mA Sq. Total current: 72 A2 (observe derating) Interrupting rating (ohmic load) max.: 144 W (24 V DC, Ã = 0 ms) 200 W (48 V DC, Ã = 0 ms) 77 W (110 V DC, Ã = 0 ms) 70 W (220 V DC, Ã = 0 ms) 1500 VA (250 V AC, Ã = 0 ms) Switching capacity min.: 0.2 W Switching capacity (360/h cycles): 5 A (24V (DC13)) 5 A (230 V (AC 15)) Switching capacity (3600/h cycles): 5 A (24V (DC13)) 5 A (230 V (AC 15)) Output fuse: 6 A gL/gG NEOZED (High demand) 4 A gL/gG NEOZED (Low demand) Also applies to applications in accordance with EN50156-1. |
Connection data | Connection technology pluggable: yes Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross-section AWG: 24 ... 12 Stripping length: 7 mm Screw thread: M3 |
Dimensions | Width: 22.5 mm Height: 99 mm Depth: 114.5 mm |
Material specifications | Housing material: Polyamide |
Characteristics | Safety data Stop category: 0 Safety data: ENISO13849 Category: 4 Performance level (PL): e Safety data: IEC 61508 - High demand Safety Integrity Level (SIL): 3 Safety data: IEC 61508 - Low demand Safety Integrity Level (SIL): 3 Safety data: ENIEC 62061 Safety Integrity Level (SIL): 3 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -20°C ... 55°C Ambient temperature (storage/transport): -40°C ... 70°C Maximum altitude: ⤠2000 m (Above sea level) Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing) Shock: 15g Vibration (operation): 10Hz...150Hz, 2g |
Approvals | CE Certificate: CE-compliant |
Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: DINEN60947-1 |
Mounting | Mounting type: DIN rail mounting Mounting position: On horizontal and vertical DIN rail Connection method: Screw connection |
ECLASS | ECLASS-11.0: 27371819 ECLASS-13.0: 27371819 ECLASS-12.0: 27371819 |
ETIM | ETIM 9.0: EC001449 |
UNSPSC | UNSPSC 21.0: 39122200 |
Description other products