2981486 PHOENIX CONTACT - Technology Bsa

Tecnichal data

Product properties	Product type: Safety relays Product family: PSRclassic Application: Emergency stop Safety door Light grid Solenoid switch Mechanical service life: approx. 10⁷ cycles Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/EN61810-3
Electrical properties	Maximum power dissipation for nominal condition: 1.68 W Nominal operating mode: 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 V Rated surge voltage/insulation: 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Input data	General Rated control circuit supply voltage U_S: 24 VDC Voltage range with reference to U_S: 0.85 ... 1.1 Power consumption at U_S: typ. 1.7 W Rated control supply current I_S: typ. 70 mA Voltage at input/start and feedback circuit: approx. 24 VDC Typical response time: 20 ms (manual start) 150 ms (automatic start) Typical release time: 10 ms Recovery time: 1 s Protective circuit: Reverse polarity protection; Suppressor diode () Max. permissible overall conductor resistance: 50 Ã© (Input and start circuits at U_S)
Output data	Contact switching type: 2 enabling current paths 1 semiconductor signaling output Contact material: AgSnO₂ Maximum switching voltage: 250 V AC/DC (Enabling current paths) 24 V (signal output) Minimum switching voltage: 15 V AC/DC (Enabling current paths) Limiting continuous current: 6 A (Enabling current paths) 100 mA (signal output) Maximum inrush current: 6 A Inrush current, minimum: 25 mA (Enabling current paths) Sq. Total current: 72 A² (I_TH² = I₁² + I₂²) Interrupting rating (ohmic load) max.: 144 W (24 V DC, Ã = 0 ms) 288 W (48 V DC, Ã = 0 ms) 77 W (110 V DC, Ã = 0 ms) 88 W (220 V DC, Ã = 0 ms) 1500 VA (250 V AC, Ã = 0 ms) Maximum interrupting rating (inductive load): 48 W (24VDC, Ã=40ms) 40 W (48 V DC, Ã = 40 ms) 35 W (110 V DC, Ã = 40 ms) 33 W (220 V DC, Ã = 40 ms) Switching capacity: min. 0.4 W (Enabling current paths) Switching capacity (360/h cycles): 6 A (24VDC) 5 A (230 V (AC15)) Switching capacity (3600/h cycles): 3 A (24V (DC13)) 3 A (230 V (AC15)) Output fuse: 10 A gL/gG NEOZED (Enabling current paths) Miniature circuit breaker C6 (24V/20A power supply unit)
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross-section AWG: 24 ... 12 Stripping length: 7 mm Screw thread: M3
Dimensions	Width: 22.5 mm Height: 99 mm Depth: 114.5 mm
Material specifications	Housing material: Polyamide
Characteristics	Safety data Stop category: 0 Safety data: ENISO13849 Category: 4 (Undelayed contacts) Performance level (PL): e Safety data: IEC 61508 - High demand Safety Integrity Level (SIL): 3 Safety data: IEC 61508 - Low demand Safety Integrity Level (SIL): 3 Safety data: ENIEC 62061 Safety Integrity Level (SIL): 3
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -20°C ... 55°C Ambient temperature (storage/transport): -40°C ... 70°C Maximum altitude: Ã¢¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing)
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: IEC 60664-1
Mounting	Mounting type: DIN rail mounting Mounting position: any Connection method: Screw connection

Technical Specs

ECLASS	ECLASS-11.0: 27371819 ECLASS-13.0: 27371819 ECLASS-12.0: 27371819
ETIM	ETIM 9.0: EC001449
UNSPSC	UNSPSC 21.0: 39122200

Description

Safety relay for emergency stop, safety door, and magnetic switches, as well as light grid, up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, 2 N/O contacts, TBUS interface, automatic or manual activation, plug-in screw connection terminal blocks

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00183.pdf

Approvals_00187.pdf

Approvals_00188.pdf

Approvals_01216.pdf

Approvals_01217.pdf

Data_sheet_03980.pdf

Manufacturer_declaration_00583.pdf

Manufacturer_declaration_02366.pdf

Manufacturer_declaration_05474.pdf

Manufacturer_declaration_17027.pdf

Package_slip_01880.pdf

Technical_drawing_41668.pdf