Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Product properties | Product type: Solid-state contactor Product family: CONTACTRON Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Number of phases: 1 Test voltage (Input/output): 2.5 kVrms (50Hz, 60s) Supply Input name: Device supply Rated control circuit supply voltage US: 24 VDC Control supply voltage range: 10 VDC ... 30 VDC Rated control supply current IS: 7 mA Protective circuit: Surge protection |
| Input data | Control Input name: Control input right/left Current consumption: 3 mA Rated actuating voltage UC: 24 VDC Triggering voltage range: 19.2 VDC ... 28.8 VDC Rated actuating current IC: 3 mA Typical response time: 200 µs Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 VDC Switchover time RL/LL (turn-on time): 80 ms |
| Output data | DC output Rated operating voltage Ue: 24 VDC Operating voltage range: 10 VDC ... 30 VDC Rated operating current (Load output): 6 A Load current: 6 A (see to derating) Quiescent current: approx. 7 mA (When switched off) Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 VDC Current limitation at short-circuits: 20 A |
| Connection data | Control circuits Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm 5 lbf-in. ... 7 lbf-in. Load circuit Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm 5 lbf-in. ... 7 lbf-in. |
| Signaling | Status display: Yellow LED Operating voltage display: Green LED |
| Dimensions | Width: 12.5 mm Height: 99 mm Depth: 114.5 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -20°C ... 80°C |
| Approvals | UKCA Certificate: UKCA-compliant UL approval Certificate: NLDX.E228652 |
| Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: EN50178 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: alignable, for spacing see derating Mounting position: vertical (horizontal DIN rail, motor output below) |
| ECLASS | ECLASS-11.0: 27371018 ECLASS-12.0: 27371018 ECLASS-13.0: 27371018 |
| ETIM | ETIM 9.0: EC002552 |
| UNSPSC | UNSPSC 21.0: 39122300 |
Description other products
