Not available 
| Product properties | Product type: Relay socket Product family: PLC-INTERFACE Application: Output function Operating mode: 100% operating factor Compatible components: Miniature relay, REL-MR-24DC/21, REL-MR-24DC/21AU; miniature optocoupler, OPT-24DC/24DC/2, OPT-24DC/48DC/100, OPT-24DC/230AC/1 Insulation characteristics Pollution degree: 3 |
| Input data | Nominal input voltage UN: 24 V AC/DC Protective circuit: Bridge rectifier Relay assembly Rated control circuit supply voltage US: 24 V AC/DC Voltage range with reference to US: 0.8 ... 1.2 Typical input current at UN: 15.6 mA (50Hz) 8.5 mA (60Hz) Typical response time: 5 ms Typical release time: 30 ms Operating voltage display: Yellow LED Protective circuit: Bridge rectifier; Bridge rectifier Optocoupler assembly Rated control circuit supply voltage US: 24 V AC/DC Voltage range with reference to US: 0.8 ... 1.2 Typical input current at UN: 15 mA (50Hz) 8.3 mA (60Hz) Typical response time: 10 ms Typical release time: 20 ms Operating voltage display: Yellow LED Protective circuit: Bridge rectifier; Bridge rectifier |
| Output data | Compatible components: Miniature relay, REL-MR-24DC/21, REL-MR-24DC/21AU; miniature optocoupler, OPT-24DC/24DC/2, OPT-24DC/48DC/100, OPT-24DC/230AC/1 Maximum switching voltage: 33 VDC 48 VDC 253 VAC Minimum switching voltage: 3 VDC 24 VAC Limiting continuous current: 3 A (see derating curve) 100 mA 0.75 A (see derating curve) Voltage drop at max. limiting continuous current: ⤠150 mV ⤠1 V ⤠1 V Output circuit: 2-conductor, floating 2-conductor floating, zero voltage switch Protective circuit: Reverse polarity protection Parallel polarity protection diode Surge protection Reverse polarity protection Parallel polarity protection diode Surge protection RCV circuit Leakage current: ⤠1 mA Max. load value: 4.5 A2s (tp = 10ms, at 25°C) |
| Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14 Tightening torque: 0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing)) |
| Dimensions | Width: 6.2 mm Height: 80 mm Depth: 94 mm |
| Material specifications | Flammability rating according to UL 94: V0 (Housing) |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C |
| Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant Shipbuilding approval Certificate: TAE0000196 Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 DNV GL data Temperature: D Humidity: A Vibration: B/C EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Electromagnetic compatibility: Conformance with EMC directive |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
| ECLASS | ECLASS-11.0: 27371603 ECLASS-12.0: 27371603 ECLASS-13.0: 27371603 |
| ETIM | ETIM 9.0: EC001456 |
| UNSPSC | UNSPSC 21.0: 39122300 |
Description other products
