Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 3049628
PHOENIX CONTACT 3049628
PHOENIX CONTACTNot available

RTO 5-PE - Bolt connection terminal block

Ground terminal block with bolt connection, cross section: 0.1 - 6 mm2, AWG: 26 - 10, width 16.3 mm, color: Green-yellow
Product Code: 3049628
Partner cod.: 3049628
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
NotesGeneral: Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
Product propertiesProduct type: Bolt connection terminal block
Number of connections: 2
Number of rows: 1
Potentials: 1
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 8 kV
Maximum power dissipation for nominal condition: 1.31 W
Connection dataGrounding foot: Yes
Number of connections per level: 2
Nominal cross section: 6 mm²
1 level
Note: Please observe the current carrying capacity of the DIN rails.
Stripping length: The stripping length depends on the specification provided by the cable lug manufacturer.
Connection in acc. with standard: IEC 60947-7-2
Nominal current: 41 A
Maximum load current: 41 A (with 6 mm² conductor connection)
Nominal voltage: 1000 V
Cable lug connection DIN46234:1980-03
Connection in acc. with standard: DIN46234:1980-03
DIN46237:1970-07
Cross section: 0.5 mm² ... 6 mm²
1 mm² ... 6 mm²
Cross section range AWG: 20 ... 10 (converted acc. to IEC)
16 ... 10 (converted acc. to IEC)
Hole diameter: 5.3 mm
Width: 10 mm
Bolt diameter: 5 mm
Screw thread: M5
Tightening torque: 2.5 ... 3 Nm
Identification color of ring cable lugs : red: 1 mm²
Identification color of ring cable lugs : blue: 2.5 mm²
Identification color of ring cable lugs : yellow: 6 mm²
Ex dataRated data (ATEX/IECEx)
Identification:  II2GEx eb IIC Gb
Operating temperature range: -60°C ... 110°C
Ex-certified accessories: 3049097 D-RT 3/5
0706647 TPNS-UK
3049819 BE-RT 3/5
1209868 SHN 8
3022276 CLIPFIX 35-5
output: (Permanent)
Ex connection data General
Torque range: 2.5 Nm ... 3 Nm
Nominal cross section: 6 mm²
Rated cross section AWG: 10
Connection capacity rigid: 0.1 mm² ... 6 mm²
Connection capacity AWG: 26 ... 10
Connection capacity flexible: 0.1 mm² ... 6 mm²
DimensionsWidth: 16.3 mm
End cover width: 2.2 mm
Height: 66 mm
Depth on NS35/7,5: 49.9 mm
Depth on NS35/15: 57.4 mm
Material specificationsColor: green-yellow
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60°C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130°C
Relative insulation material temperature index (Elec., UL 746 B): 130°C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Mechanical propertiesMechanical data
Open side panel: Yes
Environmental and real-life conditionsOscillation/broadband noise
Specification: DINEN50155 (VDE0115-200):2008-03
Spectrum: Service life test category1, classB, body mounted
Frequency: f1 = 5 Hz to f2 = 150 Hz
ASD level: 1.857 (m/s²)²/Hz
Acceleration: 0.8g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DINEN50155 (VDE0115-200):2008-03
Pulse shape: Half-sine
Acceleration: 5g
Shock duration: 30ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C)
Ambient temperature (assembly): -5°C ... 70°C
Ambient temperature (actuation): -5°C ... 70°C
Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulationsConnection in acc. with standard: IEC 60947-7-2
MountingMounting type: NS 35/7,5
NS35/15
Technical Specs
ECLASSECLASS-11.0: 27141120
ECLASS-13.0: 27250103
ETIMETIM 9.0: EC000897
UNSPSCUNSPSC 21.0: 39121400
Description
Ground terminal block with bolt connection, cross section: 0.1 - 6 mm², AWG: 26 - 10, width 16.3 mm, color: Green-yellow
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00160.pdf

Approvals_00161.pdf

Approvals_00185.pdf

Approvals_00186.pdf

Approvals_00774.pdf

Approvals_00871.pdf

Approvals_00944.pdf

Certification_00145.pdf

Manufacturer_declaration_00424.pdf

Manufacturer_declaration_03650.pdf

Manufacturer_declaration_05384.pdf

Safety_notes_00001.pdf

Technical_drawing_43470.pdf