3073461 PHOENIX CONTACT - Technology Bsa

UW 10-POT - Panel feed-through terminal block

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Solder connection, number of positions: 1, load current: 57 A, cross section: 0.5 mm²-16 mm², connection direction of the conductor to plug-in direction: 0 °, width: 10.1 mm

Product Code: 3073461

Partner cod.: 3073461

PHOENIX CONTACT

Product properties	Product type: Panel feed-through terminal block Product family: UW 10-POT Number of positions: 1 Pitch: 10.1 mm Number of connections: 2 Number of rows: 1 Number of potentials: 1 Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Nominal current I_N: 57 A Nominal voltage U_N: 400 V Degree of pollution: 3 Rated voltage (III/3): 400 V Rated surge voltage (III/3): 5 kV
Connection data	Connection technology Connector system: UW 10 Nominal cross section: 10 mm² Conductor connection exterior Connection method: Screw connection with tension sleeve Connection direction of the conductor to plug-in direction: 0° Conductor cross section rigid: 0.5 mm² ... 16 mm² Conductor cross section flexible: 0.5 mm² ... 10 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 10 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 10 mm² 2 conductors with same cross section, solid: 0.5 mm² ... 4 mm² 2 conductors with same cross section, flexible: 0.5 mm² ... 4 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.5 mm² ... 2.5 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 6 mm² Internal cylindrical gage: B6 Stripping length: 11 mm Tightening torque: 1.5 Nm ... 1.8 Nm Conductor connection interior Connection method: Solder connection Connection direction of the conductor to plug-in direction: 0°
Mounting	Plate thickness: 1 mm ... 4 mm
Material specifications	Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: tin-plated Material data - housing Color (Housing): gray (7042) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125°C
Notes	Safety note Safety note: Ã¢¢ Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. Ã¢¢ Observe the technical data provided here and refer to the documents listed under Ã¢DownloadsÃ¢. The download area contains important information, such as installation notes, technical drawings, and 3D data. Ã¢¢ The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. Ã¢¢ To maintain the nominal voltage, cast the terminals on the inside.
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e840d33717330747ad0c7b5d4b264f71/-S204x204-FJPG Pitch: 10.1 mm Width [w]: 10.1 mm External dimensions Width [w]: 10.1 mm Height [h1]: 31 mm Length [l1]: 29 mm Internal dimensions Width [w]: 10.1 mm Height [h2]: 21 mm Length [l2]: 18.3 mm
Mechanical tests	Test for conductor damage and slackening Specification: IEC 60947-7-1:2009-04 Result: Test passed Pull-out test Specification: IEC 60947-7-1:2009-04 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.5 mm² / solid / > 20 N 0.5 mm² / flexible / > 20 N 16 mm² / stranded / > 100 N 10 mm² / flexible / > 90 N
Electrical tests	Temperature-rise test Specification: IEC 60947-7-1:2009-04 Requirement temperature-rise test: Increase in temperature Ã¢¤45K Short-time withstand current Specification: IEC 60947-7-1:2009-04 Air clearances and creepage distances \| 1. Insulation coordination Application: without spacer plate Specification: IEC 60947-7-1:2009-04 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 400 V Rated surge voltage (III/3): 5 kV minimum clearance value - non-homogenous field (III/3): 3 mm minimum creepage distance (III/3): 5 mm Air clearances and creepage distances \| 2. Insulation coordination Application: with spacer plate Specification: IEC 60947-7-1:2009-04 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 500 V Rated surge voltage (III/3): 6 kV minimum clearance value - non-homogenous field (III/3): 5.5 mm minimum creepage distance (III/3): 6.3 mm
Environmental and real-life conditions	Glow-wire test Specification: IEC 60695-2-11:2000-10 Temperature: 960°C Time of exposure: 30 s Ambient conditions Ambient temperature (operation): -40°C ... 100°C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport): -40°C ... 70°C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5°C ... 100°C
Packaging specifications	Type of packaging: packed in cardboard