3073830 PHOENIX CONTACT - Technology Bsa

UTI 16-PE - Installation ground terminal block

Installation ground terminal block, number of connections: 2, number of positions: 1, connection method: Screw connection, 1st level connection right, Rated cross section: 16 mm², cross section: 6 mm²-25 mm², mounting: PE foot with mounting screw, M4, mounting type: NS 35/7,5, NS35/15, color: green-yellow

Product Code: 3073830

Partner cod.: 3073830

PHOENIX CONTACT

Product properties	Product type: Ground terminal block Number of positions: 1 Number of connections: 2 Number of rows: 1 Insulation characteristics Overvoltage category: III Degree of pollution: 3
Electrical properties	Rated surge voltage: 6 kV Maximum power dissipation for nominal condition: 2.43 W
Connection data	Grounding foot: Yes Number of connections per level: 2 Nominal cross section: 16 mm² 1st level connection right Screw thread: M5 Note: Please observe the current carrying capacity of the DIN rails. Tightening torque: 2.5 ... 3 Nm Stripping length: 12 mm Connection in acc. with standard: IEC 60947-7-2 Conductor cross section rigid: 6 mm² ... 25 mm² Cross section AWG: 8 ... 4 (converted acc. to IEC) Conductor cross section flexible: 6 mm² ... 16 mm² Conductor cross section, flexible [AWG]: 8 ... 6 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve): 6 mm² ... 16 mm² Flexible conductor cross section (ferrule with plastic sleeve): 6 mm² ... 16 mm² Nominal cross section: 16 mm²
Dimensions	Width: 12.2 mm Height: 51 mm Depth: 49.9 mm Depth on NS35/7,5: 50.5 mm Depth on NS35/15: 58 mm
Material specifications	Color: green-yellow Flammability rating according to UL 94: V2 Insulating material group: I Insulating material: PA Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 115°C Relative insulation material temperature index (Elec., UL 746 B): 125°C
Mechanical properties	General Terminal block mounting: 1.5 Nm ... 1.8 Nm (PE foot with mounting screw, M4) Mechanical data Open side panel: No
Environmental and real-life conditions	Oscillation/broadband noise Specification: DINEN50155 (VDE0115-200):2008-03 Spectrum: Service life test category1, classB, body mounted Frequency: f₁ = 5 Hz to f₂ = 150 Hz ASD level: 0.02g²/Hz Acceleration: 0.8g Test duration per axis: 5 h Test directions: X-, Y- and Z-axis Result: Test passed Shocks Specification: DINEN50155 (VDE0115-200):2008-03 Pulse shape: Half-sine Acceleration: 5g Shock duration: 30ms Number of shocks per direction: 3 Test directions: X-, Y- and Z-axis (pos. and neg.) Result: Test passed Ambient conditions Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.) Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C) Ambient temperature (assembly): -5°C ... 70°C Ambient temperature (actuation): -5°C ... 70°C Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulations	Connection in acc. with standard: IEC 60947-7-2
Mounting	Mounting type: NS 35/7,5 NS35/15 Terminal block mounting: 1.5 Nm ... 1.8 Nm (PE foot with mounting screw, M4)