Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 3076045
PHOENIX CONTACTNot available

UTI 6-L/N - Installation level terminal block

Installation level terminal block, nom. voltage: 400 V, nominal current: 38 A, Screw connection, Rated cross section: 6 mm2, cross section:0.2 mm2-10 mm2, mounting type: NS 35/7,5, NS35/15, color:gray
Product Code: 3076045
Partner cod.: 3076045
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Installation terminal block
Number of connections: 4
Number of rows: 3
Potentials: 2
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 6 kV
Maximum power dissipation for nominal condition: 1.31 W
Connection dataNumber of connections per level: 2
Nominal cross section: 6 mm²
Level 1+2
Screw thread: M3
Note: Please observe the current carrying capacity of the DIN rails.
Tightening torque: 0.5 ... 0.6 Nm
Stripping length: 8 mm ... 10 mm
Internal cylindrical gage: A5
B4
Conductor cross section rigid: 0.2 mm² ... 10 mm²
Cross section AWG: 24 ... 8 (converted acc. to IEC)
Conductor cross section flexible: 0.2 mm² ... 10 mm²
Conductor cross section, flexible [AWG]: 24 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.25 mm² ... 6 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.2 mm² ... 4 mm²
2 conductors with same cross section, solid: 0.2 mm² ... 2.5 mm²
2 conductors with same cross section, flexible: 0.2 mm² ... 2.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm²
Nominal current: 38 A (with 6 mm² conductor cross section)
Maximum load current: 47 A (with 10 mm² conductor cross section)
Nominal voltage: 400 V
Nominal cross section: 6 mm²
DimensionsWidth: 8.2 mm
End cover width: 2.2 mm
Height: 95 mm
Depth on NS35/7,5: 51.5 mm
Depth on NS35/15: 59 mm
Material specificationsColor: gray
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60°C
Relative insulation material temperature index (Elec., UL 746 B): 130°C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Electrical testsSurge voltage test
Result: Test passed
Temperature-rise test
Requirement temperature-rise test: 45K
Result: Test passed
Short-time withstand current 6 mm²: 0.72 kA
Short-time withstand current 10 mm²: 1.2 kA
Power-frequency withstand voltage
Test voltage setpoint: 1.89 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsMechanical strength
Result: Test passed
Attachment on the carrier
DIN rail/fixing support: NS35
Result: Test passed
Test for conductor damage and slackening
Rotation speed: 10rpm
Revolutions: 135
Conductor cross section/weight: 0.2 mm² / 0.2 kg
6 mm² / 1.4 kg
10 mm² / 2 kg
Result: Test passed
Environmental and real-life conditionsNeedle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DINEN50155 (VDE0115-200):2008-03
Spectrum: Service life test category2, bogie-mounted
Frequency: f1 = 5 Hz to f2 = 250 Hz
ASD level: 6.12 (m/s²)²/Hz
Acceleration: 3.12g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DINEN50155 (VDE0115-200):2008-03
Pulse shape: Half-sine
Acceleration: 30g
Shock duration: 18ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C)
Ambient temperature (assembly): -5°C ... 70°C
Permissible humidity (storage/transport): 30 % ... 70 %
MountingMounting type: NS 35/7,5
NS35/15
Technical Specs
ECLASSECLASS-11.0: 27141125
ECLASS-12.0: 27141125
ECLASS-13.0: 27250110
ETIMETIM 9.0: EC001329
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00806.pdf

Manufacturer_declaration_05110.pdf

Safety_notes_00001.pdf

Technical_drawing_44032.pdf