3246560 PHOENIX CONTACT - Technology Bsa

HDFK 50-VP-IB/IB - Panel feed-through terminal block

Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Cable lug connection, number of positions: 1, load current: 150 A, cross section: 16 mm²-50 mm², connection direction of the conductor to plug-in direction: 0 °, width: 18.8 mm

Product Code: 3246560

Partner cod.: 3246560

PHOENIX CONTACT

Product properties	Product type: Panel feed-through terminal block Product family: HDFK 50-VP Number of positions: 1 Pitch: 18.8 mm Number of connections: 2 Number of potentials: 1
Electrical properties	Nominal current I_N: 150 A Nominal voltage U_N: 690 V Degree of pollution: 3 Rated voltage (III/3): 690 V Rated surge voltage (III/3): 8 kV
Connection data	Connection technology Connector system: HDFK 50 Nominal cross section: 50 mm² Conductor connection exterior Connection method: Screw connection with tension sleeve Connection direction of the conductor to plug-in direction: 0° Conductor cross section rigid: 16 mm² ... 50 mm² Conductor cross section flexible: 16 mm² ... 50 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 10 mm² ... 50 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 10 mm² ... 50 mm² 2 conductors with same cross section, solid: 6 mm² ... 16 mm² 2 conductors with same cross section, flexible: 10 mm² ... 16 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 6 mm² ... 16 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 6 mm² ... 10 mm² Internal cylindrical gage: B10 Stripping length: 24 mm Tightening torque: 6 Nm ... 8 Nm Conductor connection interior Connection method: Cable lug connection Connection direction of the conductor to plug-in direction: 0°
Material specifications	Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: tin-plated Material data - housing Color (Housing): gray (7042) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125°C
Notes	Safety note Safety note: Ã¢¢ Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. Ã¢¢ Observe the technical data provided here and refer to the documents listed under Ã¢DownloadsÃ¢. The download area contains important information, such as installation notes, technical drawings, and 3D data. Ã¢¢ The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. Ã¢¢ To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside. Ã¯· There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE.
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e840d33717330747ad0c7b5d4b264f71/-S204x204-FJPG Pitch: 18.8 mm Width [w]: 18.8 mm External dimensions Height [h1]: 54 mm Length [l1]: 43 mm Internal dimensions Height [h2]: 37 mm Length [l2]: 35 mm
Electrical tests	Air clearances and creepage distances \| 1. Insulation coordination Application: Metal wall 4.5mm...6.0mm Internal part molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 690 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 8 mm Air clearances and creepage distances \| 2. Insulation coordination Application: Metal panel 2.0mm...4.5mm Internal part molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 800 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 10 mm Air clearances and creepage distances \| 3. Insulation coordination Application: Metal panel 1.0mm...2.0mm Internal part molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 1000 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 12.5 mm Air clearances and creepage distances \| 4. Insulation coordination Application: Plastic panel 1.0...6.0mm Internal part molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 1000 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 12.5 mm Air clearances and creepage distances \| 5. Insulation coordination Application: Metal wall 1.0mm...6.0mm Internal part not molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 250 V Rated surge voltage (III/3): 4 kV minimum clearance value - non-homogenous field (III/3): 3 mm minimum creepage distance (III/3): 3.2 mm Air clearances and creepage distances \| 6. Insulation coordination Application: Plastic panel 1.0...6.0mm Internal part not molded Specification: IEC 60947-7-1:2002-07 Insulating material group: I Comparative tracking index (IEC 60112): CTI 600 Rated insulation voltage (III/3): 250 V Rated surge voltage (III/3): 4 kV minimum clearance value - non-homogenous field (III/3): 3 mm minimum creepage distance (III/3): 3.2 mm
Packaging specifications	Type of packaging: packed in cardboard