Tecnichal data
Features and Benefits
AOI: Module communication is integrated within Studio/RSLogix 5000 using a sample Add-On Instruction (AOI), or sample ladderlogic file, reducing commissioning time.
Autoscan: The new Autoscan feature reduces start up times and simplifies troubleshooting by scanning the PROFIBUS networkand uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
ComDTM: Allows remote Ethernet connectivity with Asset Management Software significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with thiscomprehensive, fully integrated engineering and maintenance environment.
SD card slot (SD card optional) is used for storing configuration files in the event of a disaster. It can also be used to update thefirmware of the module without the need of a 1769 CPU.
PROFIBUS DP Specifications
Auto-detection mode is supported
Technical Specs
PROFIBUS DP Specifications
Specification:Description
Slaves:Maximum 125
Input/Output:Maximum 244 Bytes per Slave
Input Data:Maximum 5712 Bytes
Acyclic Data:DPV1
Status data:88 Bytes
Output data:Maximum 5760 Bytes
DPV1 services:Class 1 Alarm
DPV1 services:Class 2 Initiate/Read/Write/Data transport/Abort
Services:Global-Control, Slave-Diagnostic, Set-Parameter
Sync, Freeze Command:Supported
Baud rate:9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3MBaud, 6 MBaud, 12 MBaud
Hardware Specification
Specification:Description
PROFIBUS Interface:RS-485, max. 12 Mbps, potential free, according EN 50170
Diagnostic Interface:10/100 Ethernet, RJ48
Power Supply:+5 V ±5 % / 570 mA
Max. Distance Rating:2 slots
Dimensions:Standard 1769 Single-slot module
Burst:EN 61000-4-4, 2 kV, 5 kHz
Surge:EN 61000-4-5, 2 kV common mode, 1 kVdifferential mode
ESD:EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/Conducted Immunity:EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1kHz sine wave
Radiated/Conducted Immunity:EN 61000-4-6, 10 V, 0,15...30 MHz
Radiated/Conducted Emission:EN 55011 Class A
Vibration/Shock:IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1Octave/min
Vibration/Shock:IEC 600068-2-27, 15 g, 11 ms
Operating Temperature:0°C to 60°C (32°F to 140°F)
Relative Humidity:5 to 95% (non-condensing)
PROFIBUS conformance:Certified
Description
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software. With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
Available 
