Tecnichal data
Features and Benefits
Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
Technical Specs
EtherNet/IP Specifications
Number of Class 3 Server Connections:5
Supported PLC Types:PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported Message Types:PCCC and CIP
Class 3 Client Connections:Connected - 2
Class 3 Client Connections:Unconnected - 1
Number of Class 1 I/O Connections:2
I/O connection sizes:248/248
Max RPI time:5 ms per connection
CIP Services Supported:0x4C - CIP Data Table Read
CIP Services Supported:0x4D - CIP Data Table Write
Command List:Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
Command Sets:PLC-2/PLC-3/PLC5 Basic Command Set
Command Sets:PLC5 Binary Command Set
Command Sets:PLC5 ASCII Command Set
Command Sets:SLC500 Command Set
Siemens Industrial Ethernet Specifications
Supported PLC Data Exchange (Read and Write):Siemens S7-200, Siemens S7-300, Siemens S7-400, Siemens S7-1200
Supported Register Types:DB, Inputs, Outputs, Flags, Counters, Timers
Supported Clients:20
Hardware
Power Supply:24 VDC nominal
Power Supply:10 to 36 VDC allowed
Power Supply:Positive, Negative, GND Terminals
Current Load:24 VDC nominal @ 300 mA
Current Load:10 to 36 VDC @ 610 mA maximum
Operating Temperature:-25°C to 70°C (-13°F to 158°F)
Storage Temperature:-40°C to 80°C (-40°F to 176°F)
Shock:IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
Shock:IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
Vibration:IEC 60068-2-6; 5G @ 10 to 150 Hz
Relative Humidity:5% to 95% RH with no condensation
Dimensions (H x W x D):5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
LED Indicators:Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP⢠Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit
Ethernet Port:10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Shipped With Each Unit:2.5 mm screwdriver
Shipped With Each Unit:ProSoft Solutions DVD
Shipped With Each Unit:J180 Power Connector
Shipped With Each Unit:5â straight-through Ethernet cable
Description
ProSoft Technologyâs EtherNet/IP⢠to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IPâ¢-enabled controllers or devices and Siemens® S7 PACs, including S7-400s, S7-300s, S7-200s and S7-1200 PACs. In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
Not available 
